La description
Further Knowledge of
Exhaust Fan How toExhausta
Greenhouse Anexhaust
fan is usually located at the
top of a greenhouse. It is an important temperature control that
keeps your plants from getting too hot. It also helps control
moisture, improve pollination and keep molds and pests to a
minimum. We suggest that you install your exhaust fans "high up in
the peak of the roof. Then place two additional fans, 1 or 2 feet
from the floor, on either side of the entryway."
Difficulty: Moderate Instructions Things You'll Need
-
*-by*4s
-
Exhaust fan
-
Drill
-
Ladder
-
X-Acto knife
-
Screws
-
Wood glue
o   1
Check to see if your kit
greenhouse came withexhaust
fanslots built in to the
roof or side walls. If yours does not, before you cut out a hole,
check to make sure you won't void the warranty by making changes
to the greenhouse's design.
o   2
Measure the perimeter of
theexhaust
fanand create a frame for
it out of *-by*4s. If you're having a hard time with the
measurements, physically hold the *-by*4s up to the fan and mark
off where you need to cut. Attach the boards together with screws
and wood glue for a secure fit.
o   3
Screw your frame into one of the
roof struts using enough screws that you're sure it is completely
secure. For metal greenhouses, use the same steps except acquire
a drill bit that is meant for metal, and predrill your holes
before attaching your frame to the strut.
o   4
Cut your glazing around the inside
edge of the frame. If sheet plastic, simply staple the edges to
the wooden fan frame. If the glazing is a hard plastic, be
careful to pick the right cutting tools to avoid cracks or
shattering. Go slowly and use protective taping to reduce stress
while cutting. Then caulk or spray foam around the edges between
the frame and glazing.
o   5
Follow the instructions that came
with yourexhaust
fanto attach it to the
frame you've built.
o   6
If yourexhaust fancomes with an electric plug you'll need to run
an extension cord to it. Be sure to tuck the cords out of the way
where there is little chance of tripping over them. Plastic zip
ties work great for this.
| Pays: |
China |
| N ° de modèle: |
MK-F7 (315mm)
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
- |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
- |
| Groupe de produits : |
- |
