Prix FOB
Obtenir le dernier prix( Negotiable )
|5000 Square Meter Minimum Order
Pays:
China
N ° de modèle:
1.2-2.0mm
Prix FOB:
( Negotiable )Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
-
Commande minimale:
5000 Square Meter
Packaging Detail:
woven bags
Heure de livraison:
within 2 weeks
Capacité de Fournir:
5000 Square Meter per Day
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Mr. James
Room 405, Huapeng Office Building, No. 21 Middle Zhengyang Road, Chengyang district, Qingdao, China., Qingdao, Shandong
Modified EPDM waterproofing membranes
Products Description
Â
EPDM waterproofing membrane is the modified materials. They are based upon EPDM rubber with modifier, softener and accelerant assistants’ added modifier, to provide flexibility and stability. Through the precise ingredients, mixing, extrusion, rolling, curing processes to make of modified EPDM Waterproofing material with high strength and high flexibility.
Â
Products Specification
Thickness: 1.2mm, 1.5mm & 2.0mm  Width: 2m      Length: *0m
Â
Physical Properties(GB****3.*****0)Properties( GB****3.*****0)
 Item |
value |
||
JL1 |
JF1 |
||
 Tensile Strength (Mpa) |
normal temperature |
7.5 |
4.0 |
*0°C   ≥ |
2.3 |
0.8 |
|
 Elongation at break (%) |
normal temperature   ≥ |
**0 |
**0 |
**0°C   ≥ |
**0 |
**0 |
|
 Tear Resistance (N) |
      ≥ |
*5 |
*8 |
 Water impermeability |
*0mm |
0.3Mpa |
0.3Mpa |
Cold bending |
(°C)  ≤ |
**0 |
**0 |
 Heating Shrinking rate |
extend  < |
2 |
2 |
shrink   < |
4 |
4 |
Â
Installation
There are two installation ways. One is full sticking, the other is hot welding.
Â
Application Range
EPDM waterproof membranes form an effective barrier to liquid water or water vapor in the roof construction for industrial and civil engineering, underground engineering such as subway & tunnel, water conservancy tunnel, such as water pools & ditch, shelter, grain depot, land filling, subways.
Â
Â
Â
APPLICATION METHOD
1)Â Make sure the roof deck smooth,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.
2)Â There are two methods in application:
One way is by heating and melting method**-Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted(not flowing),then install the membrane fully bonded to the roof deck with overlaps of ***0cm.
The other way is by cold adhesive method**-Pour the cold adhesive homogeneously on the roof deck then roll the membrane to install it to be fully sticked to roof deck.
By heating and melting method and by cold adhesive can be used in alternation in application as requested.
3)Â After application,a full serious inspection is required to make sure no air bubble,no fold,no falling away etc to guarantee the waterproof life.
Â
Pays: | China |
N ° de modèle: | 1.2-2.0mm |
Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | - |
Commande minimale: | 5000 Square Meter |
Packaging Detail: | woven bags |
Heure de livraison: | within 2 weeks |
Capacité de Fournir: | 5000 Square Meter per Day |
Payment Type: | T/T |
Groupe de produits : | EPDM waterproofing membrane |