Prix FOB
Obtenir le dernier prix10 ~ 20 / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
Pays:
China
N ° de modèle:
HY9055
Prix FOB:
10 ~ 20 / Kilogram ( Negotiable ) Obtenir le dernier prix
Localité:
Shenzhen
Prix de commande minimale:
10 per Kilogram
Commande minimale:
200 Kilogram
Packaging Detail:
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
Heure de livraison:
within 3 days after payment confirmed in our bank
Capacité de Fournir:
8 Ton per Day
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter Kevin
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, , Shenzhen, Guangdong
1.the feature of HY ***5
  HY ***5 silicone rubber is a kind of low viscosity,
Inherent flame resistance, two components addtion cured potting
silicone with heat-conducting. It cures with both on room
temperature and heated temperature. It has the feature of the
higher temperature the faster of the curing time. It can be applied
to electronic components for insulation, waterproofing, fixed and
flame retardant. It mainly applied in electronic components surface
with materials of PC(Poly-carbonate)???PP???ABS???PVC, etc.
and metal materials..
2. Typical Application of Electronic
Potting Silicone Rubber
HY ***5 electronic potting silicone rubber could be applied to
- high powered electronics,ÂÂ
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance. -It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
3. Technical Guidelines
of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.*8 MPa for **5
minutes.Then the mixture could be used for
pouring.Note: The thickness of
the silicone affects the curing time. If the silicone used is a
little thick,then the curing time will be a little longer.The
temperature also affects the curing time.When in lower temperature,
we suggest customers appropriately heat the mixture to accelerate
vulcanization. With temperature of *0???**0℃, the silicone will
cure in *5 minutes; while in *5℃ room temperature, the silicone
will cure around 8 hours.
ÂÂ
4.Notes of Electronic Potting Silicone
Rubber
a.The following material may hinder the curing of HY ***5, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY ***5 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY ***5 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.
| Pays: | China |
| N ° de modèle: | HY9055 |
| Prix FOB: | 10 ~ 20 / Kilogram ( Negotiable ) Obtenir le dernier prix |
| Localité: | Shenzhen |
| Prix de commande minimale: | 10 per Kilogram |
| Commande minimale: | 200 Kilogram |
| Packaging Detail: | 20Kg/pail as a set (Part A 10Kg + Part B 10Kg) |
| Heure de livraison: | within 3 days after payment confirmed in our bank |
| Capacité de Fournir: | 8 Ton per Day |
| Payment Type: | T/T, L/C |
| Groupe de produits : | - |
