Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
hnkemeida
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Mr. Xiong
Kemeida road, Yueyang, Hunan
Classification of Electromagnetic Stirrer for Bloom (Round)
There are three kinds of EMS according to installation
position:
1. Mould Electromagnetic Stirrer: M-EMS
2. Strand Electromagnetic Stirrer: S-EMS
3. Final Electromagnetic Stirrer: F-EMS
So far, most of steel plant use M-EMS or M+F-EMS.
Features of Electromagnetic Stirrer for Billet (Round)
Mould EMS (M-EMS)
EMS inside mould using mould water: EMS is installed inside the
mould and uses cooling water system of the mould. It can be
operated conveniently with low cost. Stirring freq: 2 ~ 8Hz. (Refer
to Fig. 1)
EMS inside mould using clean water: EMS is installed inside water
jacket of the mould and uses a separate cooling water system.
Structure is compact and life is long. Stirring freq: 2 ~ 8Hz.
(Refer to Fig. 2)
EMS outside mould: EMS is installed outside the mould with separate
cooling water system. It is simple to change copper tube. EMS can
be used for wide range of sections. Stirring freq: 2 ~ 5Hz. (Refer
to Fig. 3)
Inner cooling type ems: Can be installed inside or out the mould.
Cramer windings are adopted, which has even magnetic field without
polarization. But magnetic leakage is too much with electromagnetic
pollution cooling water quality has to be very strict and operation
cost is higher. Stirring freq is 1~ 6Hz. (Refer to Fig. 4)
| Pays: | China |
| N ° de modèle: | hnkemeida |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
