Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
China
Personne àcontacter Ms. rain
songgang, Shenzhen, Guangdong
APC Series
Pure Sine Wave Inverter Charger
Â
IntroductionÂ
APC pure sine
wave inverter is the latest model presented by Jin sanhe Electric
Co.,Ltd.. Developed on the base of our previous PSW 7 series, the
APC charger has achieved significant improvements on battery
charging, AC transfer, etc. By adopting DIP (dual in-line package)
switch, the APC pure sine wave inverter provides more smart options
for users to customize the performance of the
device.
Features of
APC Pure Sine Wave Inverter,
Charger
1. High
overload ability of our APC charger is up to **0% rated power(*0
sec.).
2. APC pure sine wave inverter adopts low quiescent current, and
power saver mode to reduce power consumption to *0W(3s sensing
cycle)/3W(*0s sensing cycle) *. It can extract max. power from
various batteries with different protections, and low voltage trip
can be selected (9.5V/*0V or *0V/*0.5V).
3. Uses PFC(power factor correction) for charger, which has less
power consumption than conventional units.
4. It has *5s delay before transfer when AC resumes, and overload
protection when our APC pure sine wave inverter equips with
generator.
5. *0ms typical transfer time between battery and AC, which
guarantees power continuity of APC charger. Uses selectable
AC voltage (******3V or ******3V) for different kinds of loads.
6. Our APC charger allows start up and through power with depleted
batteries. Its powerful charge rate up to *0Amp**.
7. It can offer *-step intelligent battery charging, and equipped
with 8 preset battery type selector for totally flat batteries.
8. LCD status display, battery/AC priority switch, USB
communication port are available for our APC pure sine wave
inverter, it also has *7 alarms/warnings for easier operation and
trouble-shooting, and ability to switch the unit on/off. In
addition, select/deselect power saver mode can be used too.
Note:*For 1KW one. **For some models.
Â
Â
Technical Parameters
Â
APC Series
Inverter&Charger
| Electrical Specvifications | ||||||||
| Â | Model | APC***0W | APC***0W | APC***0W | APC***0W | APC***0W | APC***0W | APC***0W |
| Inverter Output | Continuous Output Power | ***0W | ***0W | ***0W | ***0W | ***0W | ***0W | ***0W |
| Surge Rating(*0s) | ***0W | ***0W | ***0W | ***0W | ****0W | ****0W | ****0W | |
| Capable of Starting Electric Motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP | |
| Output Waveform | Pure Sine wave/Same as (Bypass mode) | |||||||
| Nominal Efficiency | >*8%(Peak) | |||||||
| Line Mode Efficiency | >*5% | |||||||
| Power Factor | 0.**1.0 | |||||||
| Nominal Output Voltage rms | **********0Vac / **********0Vac | |||||||
| Output Voltage Regulation | ±*0% RMS | |||||||
| Output Frequency | *0/*0Hz ± 0.3Hz | |||||||
| Short Circuit Protection | Yes, Current Limit Function (Fault after 1sec) | |||||||
| Typical transfer Time | *0ms(Max) | |||||||
| THD | < *0% | |||||||
| DC Input | Nominal Input Voltage | *2.0Vdc | ||||||
| ( *2 for *4Vdc, *4 for *8Vdc) | ||||||||
| Minimum Start Voltage | *0.0Vdc | |||||||
| Low Battery Alarm | *0.5Vdc / *1.0Vdc | |||||||
| Low Battery Trip | *0.0Vdc / *0.5Vdc | |||||||
| High Voltage Alarm & Fault | *6.0Vdc | |||||||
| High DC Input Recovery | *5.5Vdc | |||||||
| Low Battery voltage recover | *3.0Vdc | |||||||
| Idle Consumption-Search Mode | < *5 W when Power Saver On | |||||||
| Charge | InputVoltage Range |
Wide:
*0~**5VAC / **4~**3VAC; Narraw: **0~**5VAC / **4~**3VAC; |
||||||
| Output Voltage | Depends on battery type | |||||||
| Charger Breaker Rating | *0A | *0A | *0A | *0A | *0A | *0A | *0A | |
| Max Charge Rate | *5A / ****0A Max (Charger Current Control) | |||||||
| Over Charge Protection Shutdown | *5.7V for *2Vdc ( *2 for *4Vdc, *4 for *8Vdc) | |||||||
|
Charger
curve(4 stage constant current) 4 step digital controlled progressive charge |
Batterytypes ( *2 for *4Vdc, *4 for *8Vdc) | |||||||
| Batterytype | Fast Vdc | Float Vdc | ||||||
| Gel U.S.A | *4.0 | *3.7 | ||||||
| A.G.M 1 | *4.1 | *3.4 | ||||||
| A.G.M 2 | *4.6 | *3.7 | ||||||
| Sealed Lead Acid | *4.4 | *3.6 | ||||||
| Gel Euro | *4.4 | *3.8 | ||||||
| Open Lead Acid | *4.8 | *3.3 | ||||||
| Calcium | *5.1 | *3.6 | ||||||
| De-sulphation | *5.5 for 4hrs | |||||||
| Remote Control | Yes. Optional | |||||||
| Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) | ||||||
| Nominal Voltage | **0Vac | **0Vac | ||||||
| Low Voltage Trip | *0V/*0V±4% | **4V/**4V±4% | ||||||
| Low Voltage re engage | *0V/**0V±4% | **4V/**4V±4% | ||||||
| High Voltage Trip | **0V±4% | **3V±4% | ||||||
| High Voltage re engage | **5V±4% | **3V±4% | ||||||
| Max Input AC Voltage | **0VAC | **0VAC | ||||||
| Nominal Input Frequency | *0Hz or *0Hz (Auto detect) | |||||||
| Â | Â | Â | Â | Â | Â | Â | Â | |
| Low Freq Trip | *7±0.3Hz for *0Hz, *7±0.3Hz for *0Hz | |||||||
| Low Freq re engage | *8±0.3Hz for *0Hz, *8±0.3Hz for *0Hz | |||||||
| High Freq Trip | ||||||||
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
