La description

set top box DM***-S Features:  **0 MHz PowerPC Processor (**0 Mips)  Linux Operating System  1 x Smartcard-Reader  MPEG2 Hardware decoding (DVB kompatibel)  Tunervarianten NIMs (DVB-S, DVB-C, DVB-T)  Tuner Module, Plug&Play  AnschluߠV.*4/RS**2  *0/**0Mbit kompatibles Ethernet Interface  2 x LED – Anzeige  *2 MByte Flash, *6 MByte Ram  Eingebauter IDE Anschluss  Festplattenunterst? f?e ?en Gr? (2, 5")  unlimitierte Kanalliste f?Radio  Kanalwechsel in weniger als einer Sekunde  voll automatischer Kanalsuchlauf  Unterst? von Bouquet-Listen  EPG-Unterst? (electronic program guide)  eigener Videotext  Unterst? von mehrfach LNB-Umschaltung (DiSEqC)  adaptierbares OSD in vielen Sprachen und Skin-Unterst?  S/PDIF optischer Anschluss AC*3  1 x Scart-Anschluss  S-Video Anschluss  analoges Modem  externes *2V Steckernetzteil Technical parameter: DBC-Tuner:  frequency range ********0MHz  signal level *******5dBm  signal-to-noise level *2 dB max  DBS-Tuner Input Connector F-Type female  Input Impedance *5ohm  AFC+/- 3Mhz  Demodulation Shaped QPSK  PEC Viterbi and Reed-Solomon  Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation  Roll-off Factor *5%  Demultiplexing according ISO ******1 Video decoder:  Video Compression MPEG*2 and MPEG*1  Video Standard PAL G/ *5Hz  Video Formats 4:3/*6:9  Footage *6:9 , automatic assimilation for *6:9 TV-Device(Over Scart)  Letterbox precolating for 4:3 TV-Device Audio decoder:  audiokompression MPEG*1&MPEG*2 Layer I and II  Audio Mode Dual(main/sub), Stereo  frequency: *2KHz, *4.1KHz, *8kHz, *6Khz, *2.*5Khz, *4Khz Output analog:  output level L/R 0, 5 Vss on **0ohm  THD>*0edB(1kHz)  Crosstalk<**5dB Output ditital:  output level 0, 5 Vss on *5 Ohm  sampled data filtering *2KHz, *4.1KHz, *8KHz  S/PDIF-Output optical(AC3) Video parameter:  level FBAS 1 Vss+/- 0.3 dB on *5 Ohm  Teletext filter in conformity with ETS **0 **2 standard Serielle Interface RS **2:  typ RS**2 bidirectional  bitrate **5, 2 kbit/s max  plug connector SUB-D*9  function: Update of Firmware Ethernet:  *0/**0 MBit compatible interface  function: Update of firmware , connect to pc UDMA*6 IDE Interface:  Intern for connect 2, 5" HDD LNB Power and polarisation:  LNB Current **0mA max.; Short-circuit-proof  LNB Voltage vertical < *4V without load, > *1, 5V at **0mA  LNB Voltage horizontal < *0V without load, > *7, 3V at **0mA  LNB shut-off at Standby-Mode Count of active satellite position:  DiSEqC 1. 0/1. 2 SAT POSITION / SAT OPTION  DiSEqC - Rotor Control Power consumption:  < *5W / *2V Input voltage:  DC*2V, alternating acurrent +/- *5% Extern power supply:  Input: ******0V AC / ****0Hz / 0, 6A  Output: *2V = / 2, 5A Physical specification:  Ambient Temperature +*******5C  Humidity < *0%  Size (W x D x H): **5 mm x **0 mm x *0 mm