Prix FOB
Obtenir le dernier prix1000 USD / Set
|1 Set Minimum Order
Pays:
China
N ° de modèle:
10KV, SC(B)9/11
Prix FOB:
1000 USD / Set Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
1000 per Set
Commande minimale:
1 Set
Packaging Detail:
standard wooden case
Heure de livraison:
15-30 days depending on order size
Capacité de Fournir:
1000 Set per Month
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Ms. Maggie
4800 BaoQian Road , Shanghai, Shanghai
SC9SCB9 series and SC*0SCB*0 series F-level resin cast dry-type
distribution transformer is a kind of HV and LV winding equipment
produced thin layer epoxy resin, with excellent performances of
antiflaming, self-extinguishing, moisture-proof, good heat
dissipation. It is widely used in high-rise building, steel plant,
chemical plant, oil production platforms.
Model definition:
SC(B)
Working conditions:
1. Altitude: ? ***0m in indoor or outdoor use
2. Maximum environmental temperature: **0degree, maximum daily
average temperature: **0degree
3. Maximum annual average temperature: **0degree, minimum
temperature: **5degree
4. Customized products are available.
Performance characteristics:
1. The iron core is produced with high quality grain orientated
cold rolled silicon steel sheet, thickness: ? 0.3 mm, *5� Full
oblique ladder type lap. Core surface is packed with protective
resin to be well protected against moisture and
rust
2. Low voltage winding usually adopts copper foil winded
cylindrical structure except of using copper conductor for small
capacity ones; High voltage winding uses multi-layer cylindrical
structure, which makes a balance ampere-turns distribution, small
magnetic-leakage loss, strong mechanical strength and good
anti-short circuit ability.
3. The transformer can be configured with bass air cooling device,
realizing automatic fan on and off through temperature controller
operation.
4. We can start and close fan or give warnings and breaking circuit
via temperature sensing element and sensor system buried in low
voltage winding, to protect the transformer.
5. IP*0: Avoid things with diameter > *2 mm into the shell.
IP*3: Avoid water with ? *0� Vertica angle into the shell. The
protection case can plays a role of preventing small animals into
then causing short-circuit faults, as well as protecting human
safety.
The no-load loss of SC(B)9 is the same as that of
GB/T*********8.
The load loss of SC(B)9 is the same as that of
GB/T*********8.
The no-load loss of SC(B)*0 is *0% less than that of
GB/T*********8.
The load loss of SC(B)*0 is 5% less than that of
GB/T*********8.
| Pays: | China |
| N ° de modèle: | 10KV, SC(B)9/11 |
| Prix FOB: | 1000 / Set Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 1000 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | standard wooden case |
| Heure de livraison: | 15-30 days depending on order size |
| Capacité de Fournir: | 1000 Set per Month |
| Payment Type: | L/C, T/T |
| Groupe de produits : | Power Transformer, shhkgroup.com |
