La description

Introduction
●  The training workbench adopt Passat B5(1.8T) electronic controlled engine assembly, with complete accessories, can be used to complete various training Content of engine load. All components adopt original parts, QC strictly testified, in accordance with Production Quality Management standard of ISO***1:***8, suit for car engine structure and maintenance practical training in the medium and senior vocational schools and car training institutions, satisfy the requirement of teaching training project on the electronic controlled engine structure, working principle, fault diagnosis, fault setting and exclusion assessment.

Features
● Demonstrate the engine work, run smoothly, actually
reflect the EFI gasoline engine structure and working
principle
● Demonstrate engine oil pressure, vacuum pressure, oil
pressure normal operating pressure
● Equipped with digit display meter to display the related
sensor working static value and dynamic value.
● Training workbench are equipped with electronic engine
control system schematics and detection terminal, through
a variety of professional instruments to detect the signal
parameters of sensors, actuators etc. such as voltage,
resistance, frequency etc.
● Equipped with diagnostic blocks can be connected to a
dedicated or general-auto decoders, to complete reading
fault codes of engine electronic control system, clearing
fault codes, reading data stream, matching adjustment,
programming, testing, testing terminal components etc
engine diagnostic function.
● Fault setting and assessment system (please refer to
the detailed function introduction of fault setting and
assessment)
● Rotate position of training sets are equipped with safety
shields to keep safe.
● Training sets equip with gasoline extinguisher and short
circuit self-protection device
● With locking casters for mobile devices, easy to move for
teaching

â–  Basic Configuration
● Engine assembly, engine control unit, engine circuit plug.
combination instrument , training panel, diagnostic block,
tank assembly, up and down pipe, Kettle, thermostat switch,
cooling fan assembly and bracket, pressure gauge, vacuum
gauge, ignition switch, battery, starter, generator, fuel pump
assembly, fuel filter, air filter, Ignition key with a chip,
intake and exhaust manifolds, catalytic assembly, oil tank,
movable bench and mobile casters, general power switch,
relay and fuse box, instruction manual and user training
guide etc.

â–  Technique Features
● Engine Model: Volkswagen AWL
● Engine Location: Front
● Engine type: L
● Aspiration: Turbocharged
● Number of cylinders: 4
● Displacement: 1.**1L
● Emission standard: Euro 2
● Fuel type: Above No.*0 unleaded gasoline
● Compression ratio: 9.3: 1
● Maximum torque: **0 / ********0N.m
● Maximum speed: ***0rpm
● Input voltage: AC **0V
● Power supply: DC *2V
● Battery capacity: *0HA
● Fuel tank capacity: *2L
● The fuel grade: *3 #
● Working temperature:**0°C**0°C
● Dimensions:***0×**0×***0mm(L*W*H).

â–  Training Content
● Engine structure and composition training
● Engine component setup position training
● Engine sensor voltage, resistance, signal testing
training
● Engine fuel pressure, Vacuum pressure, oil pressure
training
● Engine Schematics analysis training
● Engine control unit fault code reading, fault code
eliminate, data flow reading, Anti-theft matching
adjustment, programming, terminal component testing
training
● Engine troubleshooting and confirm training
● Engine fault setting and exclusion training
● Engine practical operation and theoretical exam
training