Digital Bevel Box

La description

Bevel box is an innovative tool that provides digital display through LCD which is convenience to read. For its small in size and light in weight, it is real easy to be carried and used. The disk magnet at the base of the unit make it could stick to the measured surface. The Bevel Box is usefulness in measure bevel angle wherever you intend to take***- in making, using, examining or repairing machines, vehicles, and tools, also in manufacturing materials of decoration and architecture, and in its process of decoration, architecture. Features: 1. Conversion between absolute measurement and Relative measurement. 2.Automatic shut off after 5 minutes. 3. Compact structure, easy to expand the measuring range by combining with other tool. 4. Could take any angle as 0 degree. Specifications: 1. Resolution: 0.1 o 2. Repeatability: 0.1 o 3. Measuring range:+ — **0 degree (0 ~**0 degree) 4.Working current : <**0uA 5.Work temperature : *5 oC ~ **0 oC 6.working humidity: ≤*5%RH 7.Power : 3V CR***2 Lithium battery 8.battery life: more than ***0 hours 9.Dimension : 2 inch *2 inch*1.3 inch The following operation instruction will show you further about the unit: SAFETY FIRST Always turn off and unplug power tools before using the digital angle gauge Never use your power tools without properly installed blade guards. The guards are not shown in our instructions only to make the illustrations clear. INSTRUCTIONS 1. Set the gauge flat on a reference surface such as a table saw, miter saw, or jointer table. While on a band saw, the blade will be the reference surface. 2. Turn ON and press the ZERO to set the gauge to 0.0 degrees which calibrates the reference surface. (see Figure 1) 3. Attach to the saw blade or jointer fence using the imbedded magnets. (see Figure 2) The gauge should always be kept perpendicular to the table for all measurements. (see Figure 3) 4. A properly adjusted saw blade, jointer fence or band saw table will display *0.0 degrees. If the reading is off, re-adjust your machine following the manufacturer’s instructions. (see Figure 4) 5. Now you can press ZERO to set the gauge to 0.0 degrees and measure the angle of your saw blade, jointer fence or band saw table.(see Figure 5 & 6) 6. Replace the battery by rotating the cover on the back of the gauge counter clockwise.(see Figure 7) (The figures could not been represented here, you could view our web site to learn more and watch the Figures at Instruction Sheet Download under its respective model)