DBT-Q2009 full color and dual-color control system

La description

Functions: 1、Fully support DBT-Q***7ï¼› 2、Support led drivers with PWM, highly improved refresh rates with static screens and dynamic screens. 3、Full new grey engine, better performance on low grey level. 4、Support automatic collection on error detection and other error information. 5、Support PC ***0M network card image sending, need no sending card. 6、Support *0bit HD video source. parametes： Type Typical value Max value Supported screen type single color, dual-color, full-color, real pixel, virtual pixel. Supported LED drivers MBI***6/MBI***0/MBI***6/ MBI***9/MBI***2/LPD***3/DM**3/DMX**2/ZQL***6 Pixels by single sending card ***0×***4(dual ports) ***0×***0(four ports) Number of receiving cards connected by cable <**0 **6 Pixels by single receiving cards **6 x**2（full color） ***4 x**2（dual color） **2×**4（full color） ***0 x**2（dual color） RGB data groups by single receiving card ****4 *4 Lines by one group RGB 1/2/4/8/*6/*2 *2 Grey grades ***6(4k) ****6(*4k) Data CLK frequency *5.*2MHz *1.*5MHz Refresh rate **0Hz >***0Hz(如MBI***2) Brightness wastage *5~*0% <5% PWM brightness adjust degree **6(may automatically adjust by brightness sensor) Electronic current plus brightness adjustment grade *4/**6(according to led drivers) Dot by dot revise pixels by PWM brightness *4x*4 **6x**6 Pixels on open circuit and short circuit error detection static：***8x*6ï¼›1/2：***4x*6ï¼› 1/4：***8x*6ï¼›1/8：***6x*6ï¼›1/*6：***2x*6 Fiber transmission distance Multi-mode fiber ：**0metersï¼› single-mode fiber：*0KMs Other functions Power on gradual protection 、OE Polarity switch protect screen scan tubes, led screen self-detecting No sending card function Sending images by ***0M network card PC