La description
If you are interested in this product, pls +
w.h.a.t.s.a.p.p.:+/8/6/**9/**6/2/4/**7
Proper installation
methods:
- The infrared
transceiver needs to be aligned with the infrared window of the
meter.
- The infrared
transceiver can be placed 0 to 5 meters away from the meter.
- There needs to be no
barrier between the infrared transceiver and the meter and it
needs to be visible.
- The infrared
transceiver and the meter can be separated by transparent glass.
- The installation Angle
is less than 5 degrees.
SC-GP-IR**5 infrared meter transceiver is a general meter
launched by Shanghai Data Acquisition IOT Technology Co., LTD.
RS**5 based on infrared communication, infrared meter photoelectric
probe, can collect electric energy data, voltage, current, power
factor and other electric parameter data of state grid electricity
meter.
 Introduction to the principle of infrared meter reading: The
infrared photoelectric probe can regularly read the parameter
information of the smart meter through the infrared optical port
and upload it. The infrared meter reader has the function of
infrared signal modulation and demodulation, modulating the binary
digital signal into a pulse sequence of *8 KHz frequency, and
driving the infrared emitting diode to send out in the form of
infrared light pulse; the transceiver converts the received light
pulse into electrical signal, and then amplify, filter and send to
the demodulation circuit for demodulation, restore to the binary
digital signal, after the message analysis, send to the server
according to the specified format (such as Json).
This product supports all kinds of meter reading scenarios of
meters, gas meters, flowmeters and other meters with infrared
communication interfaces. It is suitable for power meter data
collection, smart city data collection, power monitoring data
collection, energy saving and emission reduction data monitoring
system data collection, energy consumption monitoring system data
collection, photovoltaic system data collection, intelligent
monitoring data collection, robot data collection, intelligent
security system data collection, cloud platform system data
collection; electricity meter verification and testing table;
especially suitable for the lead seal of total meter of state grid
of power supply bureau is completely closed, and not sealed.
|
Model
|
Transmission
Mode
|
Characteristics of the
Description
|
|
SC-LP-IRNB
|
wireless
|
NB-IOT / LoRa communication, long life lithium battery power
supply, suitable for low acquisition frequency, difficult
external power supply occasions.
|
|
SC-GP-IR4G
|
wireless
|
4G communication, **0V AC / *2V DC power supply, suitable for
high acquisition frequency or convenient external power
supply occasions. Because the device is on line for a long
time by default, it can support remote configuration
parameter debugging, and the site only needs to install and
connect power.
|
|
SC-GP-IR**5
|
wired
|
Separate infrared probe, a ***-rpm infrared transceiver,
transparent transmission. Users should consider the
electricity meter agreement connection.
|
|
SC-GP-IRLAN
|
Ethernet / WiFi / LoRa
|
Infrared acquisition, network port / WiFi interface / LoRa,
support for Modbus RTU protocol (virtual serial port) or Json
format for data reporting.
|
SC-GP-IR***-modbus
(Custom Edition)
|
wired
|
Infrared acquisition, RS**5 interface, universal Modbus
protocol, users do not need to consider the electricity meter
protocol docking.
|
Â
Â
Our company
solemnly promise you:
 You buy more than just
products, but also meticulous and thoughtful technical support!!!(
=^_^= )
 If you purchase our wireless
products, we will provide free remote guidance, remote
configuration and debugging service, and send the data to the cloud
platform specified by the customer.
Free IOT solution consulting
services!
Line Sequence
Definition
Red: + *2V Black: GND Yellow: **5A White: **5B
Note: Please contact us to customize the *4V power supply
version
Length of
Line: 1
meter
Acquisition
characteristics
- Infrared carrier frequency: *8 kHz
- Communication wave rate: ***0~*****0 bps, adaptive according
to the communication parameters of the electricity meter
- Communication distance: *0 meters
- Communication Angle: *5 degrees
- Infrared communication protocol: Transparent transmission
Â
      Electrical
Characteristic
- Power supply mode: 5~*2V DC power supply (with reverse
connection protection function of power cable)
- Working power consumption: less than 0.5w
- Emission power consumption: *0 ~ *0 *@********************strong>Â Â Â Â Â Â
Communication Characteristics
- Transmission mode: RS**5 transparent transmission
- Paud rate: ***0~*****0bps, adaptive
Structural
Characteristic
- Material: ABS plastic (enclosure)
- Protection level: IP *4
- Body size: *8mm *7mm *5mm
- Installation method: paste / magnetic suction installation
Working
Environment
- Temperature**0°C~*5°C, humidity of 0~*5%
Storage
Environment
- Temperature**0°C~*0°C, humidity of 0~*5%
-
Infrared non-contact acquisition,
which does not affect the instrument body
-
Small size
-
Simple installation, fast deployment,
help the Internet of things project quickly landing
-
Free gifts of multiple meter reading
and debugging software and electricity meter communication
protocol documents
A total of three meter reading debugging software:
Â
State grid concentrator electricity meter debugging software
Â
Multi-function electricity meter communication protocol
debugger
Â
DL / T*******7
 Complimentary document: DLT*******7 multi-function
electricity meter communication protocol ***0.pdf
Software download method: follow the wechat official account
"Digital", enter the product information menu, download relevant
information.
Â
Â
 Data collection of the *0kV metering cabinet and electricity
meters in the industrial park
In this case, the power meter data of *0kV metering cabinet in the
industrial park is collected by battery power supply, and the
collection frequency is 2 hours each time, and the power meter data
is sent to the remote server by GPRS to realize the energy
consumption monitoring in the park.
- The infrared transmitting and receiving hole can
be aligned with the infrared equipment that needs to collect
communication. During the communication process, please ensure
that the communication distance and tilt Angle are within the
technical requirements, otherwise the communication effect will
be seriously affected.
| Pays: |
China |
| N ° de modèle: |
SC-GP-IR485
|
| Prix FOB: |
28.8 ~ 29.8 / Box ( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China |
| Prix de commande minimale: |
28.8 per Box |
| Commande minimale: |
1 Box |
| Packaging Detail: |
box |
| Heure de livraison: |
15 to 20 days |
| Capacité de Fournir: |
10 Box per Month |
| Payment Type: |
Other |
| Groupe de produits : |
- |
