Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Nancy
Zhengzhou, Henan
D-Type Hydrapulper is advanced pulper equipment for pulping various
kinds of pulp board, broken and waste paper in paper making
process. In D-Type Hydrapulper pulping process, VOKES rotor is off
center, makes the contact between pulp and rotor more quick, and
shortens the time of feeding and pulping, improves the capacity
without increasing motor power and volume.
D-Type Hydrapulper Structure
Dtank:Dtank is welded by steel plates, there is U-steel on the top
outside to reinforce the tank, and baffler on the bottom of the
inside cone to make the pulp reflux to be cyclic. A rectangular
interface at the bottom of tank is used to discharge
impurities.
Rotor Device: Rotor and outlet plate are above the pulper tank
bottom plane, become a low pressure area around rotor to collect
heavy impurities, when the heavey impurities deposit to the bottom,
will be taken to the sidement well or heavy slag collecting tank
due to the effect of rotation of pulping, this reduces the contact
between rotor and impurities, prolongs the rotor service life, and
prevents twisted rope winding on the rotor, protect the rotor and
twisted rope.
Outrigger: Outrigger is welded by steel plates, and to support the
tank and rotor device.
D-Type Hydrapulper Main Feature
1. New type energy-saving VOKES rotor strengthens hydraulic
circulation and fiber relief.
2. Change slurry flow ways, make the contact between pulp and rotor
more quick, and shorten the time of feeding and pulping, improve
the capacity without increasing motor power and volume.
3. Pulp chamber of rotor is higher than the under surface of pulper
barrel, form a low pressure area around rotor to collect heavy
impurities, reduce wear to cutter head and sieve plate. So that can
prolong the rotor and sieve plate service life .Â
4. Adjustable gap between rotor and sieve plate ensures the pulping
effect.
5. When D type hydrapulper work with hydrapurger, drum screen,
ragger, rope cutter and grapple and form continuous pulping and
deslagging system, the large light and heavy impurities in pulper
can be rejected in time, which avoid pulping the impurities, reduce
the following equipment burden. At the same time, it take less time
to stop and clean, improve the whole system dealing capacity.
D-Type Hydrapulper Maintenance
Lubrication: Lubricate bearing regularly, refuel ZGM*2 once two
week, change absolutely every year.
Replace screen plate: Due to the wearing of the screen plate and
screen diameter increased, need to change the screen plate, firstly
remove cap and rotor, then change fastening screw on the
screen.
Replace copper bush: Remove cap and rotor, then pull down chassis,
change old copper bush and heat new copper bush to mix suitable
position of the chassis.
Replace bearing: Hoist out rotor device by crane, remove rotor,
chassis and screen plate above, discharge large pulley and bearing
below. Change bearing, and assemble it inversely.
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
