La description
The correct installation method of corn oil extraction process:
Before installing the equipment, the newly purchased corn oil
extraction machine should be cleaned thoroughly. Remove the spindle
and the cage, and polish the outer surface, inner surface and screw
feeder of the screw with the abrasive cloth. All lubrication parts
shall be lubricated with grease, and the type and brand of the
lubricating oil added in the gearbox shall conform to the
requirements in the specification. After polishing and cleaning,
the equipment of corn oil extraction machine must be arranged
according to the original position when installed. Because the
arrangement position and order of the circular arrangement have a
great relationship with oil extraction performance. After the
circular platen is installed, press it with the pressing nut. After
the above treatment, the corn oil press equipment can be fixed on
the foundation with anchor bolts. When the equipment of corn oil
extraction machine is installed, the motor's belt pulley should be
aligned with the belt pulley of the oil extraction machine. They
should be in the moderate position and correct rotation direction.
The belt tension should be adjusted properly. Â
The process of extracting corn oil from corn oil press machine
1. Water embellish
According to the difference between the endosperm and the germ,
make the corn husk and germ absorb water. The germ is highly
absorbent and expands after absorbing water. The germ increases
toughness and elasticity and does not break when breaking grits or
crushing grits, making it easy to break away from the embryo. After
absorbing water, corn husk is easy to peel, and at the same time,
it is helpful to separate from the embryo and reduce the phenomenon
of the intercalated or intercalated embryo. This improves the
embryo rate and the purity of the germ.
2. Peel and break grits
After the corn is moistened with water, the grits are then peeled
and broken. During the operation, the degree of dermal breakage
should be strictly controlled to ensure that the germ does not
carry the skin and the skin does not carry the germ. Grits are
broken into several lobes by a horizontal three-section sand
roller. The germs are separated from the endosperm in large amounts
as the corn is broken.
The proportion of grits and embryos was different. The proportion
of grits was 1.*0 ~ 1.*5 grams/cm³, and the proportion of embryos
was 0.*8 ~ 0.*9 grams/cm³. The separation effect can be effectively
controlled by adjusting the height of the grits and the baffle. The
extracted germ is then sent to a windscreen to extract the husk
from the embryo to improve the purity of the embryo.
3. Embryo screening
The selected embryos still contain grits. We can put them into the
grinding machine to press the embryos, and then screen them with
the horizontal.
4. Purification
The grits, powder, chaff and other impurities in the germ should be
screened out with a vibrating screen before being pressed, so as to
improve the purity of the germ as much as possible.
5. Dry
Generally, the water content of corn germ is *1 ~ *5%, and its
suitable water content is less than 4%. Therefore, it is necessary
to conduct thermal drying on the extracted germ, so that the water
content of corn germ can reach less than 4% before being pressed
into the machine. The drying methods used are fire drying, steaming
wok and mechanical drying.
6. Press
Most of the corn oil press equipment used are type *5 and type **0.
With its own baking equipment, it guarantees the extraction of the
germ.
Â
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
700 ~ 10000 / (Negotiable)
Obtenir le dernier prix
|
| Localité: |
china |
| Prix de commande minimale: |
700 |
| Commande minimale: |
- |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
800 Sheet per Month |
| Payment Type: |
T/T |
| Groupe de produits : |
- |
