La description
CHAPTER
1:Â
Product Description
Â
The CK***0 is a *-zone to **-zone FACP (Fire Alarm Control Panel),
which uses conventional devices. The panel accepts
water flow devices, two-wire smoke detectors, four-wire smoke
detectors, pull stations and other normally-open contact devices.
Outputs include four Notification Appliance Circuits (NAC,
SOUND**4), three standard Form-A relays (alarm, trouble and
supervisory) and an EIA***5 port to interface with remote
annunciators and optional remote relay modules. The FACP is field
programmable via the panel keypad. It also supervises all
wiring, AC voltage and battery level.
Â
This series of panels are basically the same in application and
operation, their differences are shown in Table **1. CK***0 will be
described as the example in the following sections.
Â
Table **1
|
FACP |
Number of Detection Zones |
Number of Sounder Outputs |
Output Delay Settings |
|
CK***4 |
4 |
1 |
N/A |
|
CK***8 |
8 |
2 |
N/A |
|
CK***6 |
*6 |
4 |
N/A |
Â
Â
1.1
ProductFeatures
Â
l      4,8,*6
Class B Initiating Device Circuits (IDCs)
✓  All zones accept conventional detectors
and any normally open contact device
l      Four
Class B Notification Appliance Circuits (NACs)
l      One
Form-A Alarm
Relay
l      One
Form-A
Trouble Relay
l      One
Form-A
Supervisory
Relay
l      3.0
amps of system power
l      Max
*0 conventional detectors in one zone.
l      Auto/Manual
mode setting enable walk test.
l      Each
Zone can be disabled,
l      Sound
output can be disabled.
l      Manual
active sound output enabled.
l      Able
to report short and broken circuit of detection zones.
l      Designed
with standby batteries and space provision for two sealed lead-acid
batteries.
l      Testing
and disable functions.
1.2
Specifications
Â
AC Power
AC*****0 VAC, *0 Hz, 2.3 amps
Wire size: minimum #*4 AWG (2.0 mm2) with **0V insulation
Battery (lead acid only)
Maximum Charging Circuit: Normal Flat *—*@******************** Charger Capacity: *8 Amp Hour batter
Sound Output Device Circuits
General Alarm Zones 1 through *6
Operation: All zones Class B
Normal Operating Voltage: Nominal *4 VDC (ripple = **0 mV
maximum)
Alarm Current: *5 mA threshold
Short Circuit Current: *2 mA maximum
Maximum Loop Resistance: **0 ohms
End-of-Line Resistor: 4.7K, ½ watt
Detector Loop Current is sufficient to ensure operation of two
alarmed detectors per zone
Standby Current: 7.*6 mA
Three Relays Output
Relay contact rating: 2.0 amps
| Pays: |
China |
| N ° de modèle: |
CK1000
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
200 |
| Packaging Detail: |
- |
| Heure de livraison: |
15-30 |
| Capacité de Fournir: |
100000 |
| Payment Type: |
- |
| Groupe de produits : |
fire alarm control panel
|
