Common Non Electric Detonators By Jolly Star International Limited,

Common Non Electric Detonators

Pays:

Hong Kong

N Â° de modÃ¨le:

Prix FOB:

(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

Commande minimale:

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

Payment Type:

Groupe de produits :

Shock Tube Detonator

La description

of Common Non-Electric Detonators
(1)Common Non-electric detonator ofCommon Shock Tube Percussion Cap for Civil Explosive is called F 8 for short; Millisecond detonating tube detonator, FMS1-8; Half-second detonating tube detonator,FHS1-8; 1/4-second detonating tube detonator, FQS1-8; Second detonating tube detonator, FS2-8 ( F is on behalf of overburden /plating copper or steel flange steel shell; MS1, the first millisecond series; HS1, the first half-second delay series; QS1, the first 1/4 second series; S2, the second series; 8, detonator number).
3. Application of Non-Electric Detonator/Shock Tube Detonator
Shock Tube Percussion Cap for Civil ExplosiveNon-Electric Detonators
(1)It is strictly prohibited to fall, hit, or near to heat source device during delivery and use. Its users should strictly enforce relevant provisions of GB6722-2011 "Blasting Safety Regulations".
(2)Please handle these products gently in the process of operation and avoid delivering detonator products between two people bare-handed.
(3) It is prohibited to be used in any dangerous situations of gas and other combustible gas, coal dust and dust explosion.
(4) Users should get a clear understanding of detonator segments before using it, and then connect these with designed connection methods as well as hole layout scheme, section filling. Beware of mixing section, wrong section use, it will cause bad blasting effect.
(5)Please avoid scratching, permanent knotting, burning out detonating tubes in the process of using. Keeping sand, soil, water, oil or other debris away from detonating tube, otherwise, it will affect bad initiation. No parting shock tube at will during using.
(6.) If using metal tube detonator as detonating primer in detonating network, Users must pack the detonator bottom tightly with tape before the connection of detonating tubes, lest misfire if metal pieces from detonator explosion cut off the plastic detonating tube.
(7) In network connection, detonating tubes should be evenly arranged in outside of detonator, and winded more than five layer so that it can be wrapped tightly. One detonator can be tied up to 20 detonating tubes, and there should be at least 100mm at the bottom of detonating tubes for bundling.
(8) In connection with plastic connection piece, the plastic detonating tube should be put into the hole at the bottom of wear, and tied at exit in case it falls.
(9) When assembling the explosive and the detonator, users should punch small holes with pointy sticks at cartridge end or side, then put the detonator into the hole, instead of inserting the detonator directly into the cartridge.
(10) Once opening the original packaging of detonator, it should be used in time, no more than two weeks. Those not used temporarily should be stored in a dry place, in case of absorption of moisture. it is strictly prohibited to be stored after opening.
5. Storage Condition and Shelf Life of Common , in accordance with the standard GB19417-2003, can reliably initiate kinds of industrial explosive(primary explosive column/initiating explosive column/firing column-shaped explosive), detonating tube and detonating cord with detonator sensitivity. It is suitable for blasting operation in explosion dangerous sites with no gas, coal dust, or other combustible dust.
(1)Shock Tube Percussion Cap should be stored in dry and ventilated warehouse, far away from fire source and power supply, especially explosives. It should be piled up and delivery channel is not less than 1.2 meters wide; the check channel between stacking and wall, or stacking and stacking, should not be less than 0.8 meters wide, and not allowed to pile any item; the total height of stacking should not be less than 1.6 meters.
(2.) Its storage should be consistent with GB28263-2012 requirements of Enterprise Safety Management Regulation of Civil Explosive Products Production and Sales.
(3) With the original packaging seal, common plastic shock tube, stored in a well ventilated, dry, fire-prevention, guard-against-theft warehouse with lightning protection devices, its shelf life is two years since the date of manufacture.
6. Similar Products to Common Non-Electric Detonators

Welcome your inquiry of our common non-electric detonators, and of course other civil explosive products if you need.

Pays:	Hong Kong
N Â° de modÃ¨le:	-
Prix FOB:	(Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	-
Commande minimale:	-
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	-
Payment Type:	-
Groupe de produits :	Shock Tube Detonator