Prix FOB
Obtenir le dernier prix4000 / Piece
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
Zirconium Reactor
Prix FOB:
4000 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
4000 per Piece
Commande minimale:
1 Piece
Packaging Detail:
wooden case
Heure de livraison:
20 to 30 days
Capacité de Fournir:
50000 Ton per Year
Payment Type:
-
Groupe de produits :
Personne àcontacter Leo
No.1818,SunTangBei,RD,Cixi, Ningbo, Zhejiang
Stainless steel clad
plate
As an advanced new material, the stainless steel clad plate fully
realizes the complementary advantages of materials which both
show decay resistance, abrasive resistance, diamagnetism and
decorativeness of composite material, and exhibit good
weldability, moldability, ductility and thermal conductivity of
base material. Application of this material can significantly
improve strength, rigidity and impact load strength, reduce
weight of structural members, decrease costs significantly while
ensuring technical requirements, and this material is a new
generation energy conservation and environmental protection
product.
1. Executive standard of stainless steel clad plate: refer to
GB/T8165-2008 Stainless Steel Clad Plate and Steel Strip
2. Product specification: thickness: 3mm≤ thickness ≤50mm, wherein thickness of cladding layer 0.5mm～5mm, basic layer thickness ＞2.5mm, width 1,500mm～2,400 mm and length ＜15,000mm.
3. Product type: common base materials: Q235A(B), Q345A(B), 20g, 20R, 16MnR, etc.
Common cladding materials: 0Cr13, 1Cr13, 0Cr17, 0Cr18Ni9, 0Cr18Ni10Ti, 1Cr18Ni9Ti,
4. Feature of stainless steel cladding plate:
(1) Binding rate: no less than 99%
(2) Mechanical property
| Interface shear strength Jb,Mpa≥ | Yield point σs, Mpa | Tensile strength σb, Mpa | Ductility δ, % | Impact toughness Akv, J |
| 210 | Not less than standard value of base layer steel plate | Not less than standard value of base layer steel plate and not greater than ceiling limit value 35Mpa | Not less than standard value of base layer steel plate | Should comply with requirements for base layer steel plate |
（3）Processing property
| Thickness, mm | Flexural center d | excurvation, incurvation, 180º |
| ≤20 | 2a | No layering and crack |
Â
Note: a stands for total thickness of clad steel plate.
5. Delivery state: deliver after hot rolling, heat treatment or polishing.
6. Specific application scope: raw coal hopper of power plant, pressure vessel, storage tank, reactive tank, desulfuration equipment, anti-corrosion pipeline, water tank, etc.
7. Stainless steel clad plate specification, type and application
| Pays: | China |
| N ° de modèle: | Zirconium Reactor |
| Prix FOB: | 4000 / Piece Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 4000 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | wooden case |
| Heure de livraison: | 20 to 30 days |
| Capacité de Fournir: | 50000 Ton per Year |
| Payment Type: | - |
| Groupe de produits : | Composite Metal |
