Prix FOB
Obtenir le dernier prix999 ~ 6999 /
|1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
999 ~ 6999 / Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
999
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
Personne àcontacter Mr. Michael
Hongtai Building, No.29 Xixian Road, Dalian, Liaoning
Overview Â
The 2BE3 liquid ring vacuum pumps and compressors are high-efficient and energy-saving products developed by our company on the basis of our scientific achievements and production experiences over the years and internationally advanced technique of similar products. They have low vacuum and high extraction capacity and are usually applied to exhausting water insoluble, noncorrosive and solid particle-free gases for creating vacuum and pressure in closed containers. They are also applicable for corrosive gases, or corrosive liquid can be used as treatment fluid by modifying materials of parts. The products are being widely used in fields of paper making, chemistry, pharmacy, coal dressing, mineral separation, petrochemistry, light industry, food, metallurgy, building material, stoneware and chemical fertilizer due to their outstanding and reliable performances and durability.
The main
characteristics of 2BE3 series products:
· The tolerance, corrosive status, and the begrime situation can be
easily observed by the big inspection port on both sides of the
end-shield.
· The 2BE3 series pumps have flanges both on the top and sides with
the same diameter. It is more convenient to connect with the 2BE3
series pumps.
· The bearings are all used of the imported products in order to
keep the precise orientation and the high stability during the
working of the pump.
· The material of the impeller is QT**0 nodular iron or steel
plates for ensuring the stability of the pump under the various
rigorous situations and extending the life of the pump
effectively.
· The casing is made of steel or stainless steel plates to extend
the lifetime of the 2BE3 series pumps.
· The shaft bushing is made of stainless steel plates to extend the
life of the pumps 5 times more than the normal material.
· The V-belt pulley (when the pump is driven by the belt) is used
of the high precise pulley with taper bushing to keep the
reliability of the pump and extend its life. And it is also easy to
mantle and dismantle.
· The unique design of setting the separator above the pump saves
the space and decreases the noise efficiently.
· All the spare parts are cast by the resin sands that make the
surface of the pump very smooth. So it is not necessary to cover
the surface of the pump with putty and gives out the heat
efficiently.
· The mechanical seals (optional) are all used the imported
products so as to avoid the leakage during the working of the pump
for a long time.
Compared
with 2BE1 series, 2BE3 series are different in the following
aspects:Â
They have higher suction capacity and lower vacuum, thus they are
suitable for operations requiring large suction capacity such as
mine gas discharge and pressure swing adsorption for chemical
plants.Â
Cylindrical ball bearings are replaced by double-row tapered roller
bearings, thus service lives of the bearings are prolonged and load
carrying capacities are improved.
Theconcave-convex connectorfor locating the pump and distribution
plate is replaced bytwo pins on one surface. The stop pins ensure
the radial clearance between the impeller and pump.Â
Air inlets and vents are arranged on both top and side end of the
pump cover. In case that the gas shall be filled or discharged from
the top, the side air inlets and vents are sealed by blank caps,
thus there are more assembly options.
High voltage motor may be available for the 2BE3 series since their
energy consumptions and powers are increased due to large volumes
and large suction capacities. The transmission is usually carried
out by reducers. Pumps *0/*2 may use belt transmission while pump
*0 and superior ones shall adopt reducers for
transmission.Â
2BE3 series have additional eccentric clapboards for dividing the
pumps into two chambers with impeller middle plates. Air inlets and
vents on side flanges make one pump adequate for operations
requiring two pressure points, such as paper making.
Table of performance of 2BE3 liquid ring vacuum pumps
| Type |
Speed (Drive type) r/min |
Max shaft power kW |
Motor Power kW |
Suction Capacity |
Limited vacuum (abs) mbar |
Weight of bare pump with separator kg |
|
| m 3 /h | m 3 /min | ||||||
| 2BE3 **0 |
**0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) |
*2 *5 **5 **4 **8 **7 **9 |
**0 **0 **2 **0 **5 **0 **0 |
***0 ***0 ***0 ***0 ***0 ***0 ***0 |
*0.8 *4.2 **4.2 **5.0 **4.5 **3.3 **3.3 |
**0 | ***5 |
| 2BE3 **0 |
**0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) **0(V-Belt) |
**8 **2 **7 **0 **4 **9 **0 |
**2 **0 **5 **0 **0 **0 **5 |
***0 ***0 ***0 ***0 ****0 ****0 ****0 |
**0.8 **7.5 **2.5 **6.6 **9.2 **8.3 **3.3 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**2 **1 **3 **8 **7 **8 |
**0 **0 **0 **0 **5 **0 |
***0 ****0 ****0 ****0 ****0 ****0 |
**5.0 **9.2 **0.0 **1.7 **0.0 **8.3 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**2 **0 **5 **8 **7 **2 |
**0 **0 **0 **5 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**8.3 **5.0 **3.3 **6.7 **0.0 **1.7 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**5 **3 **5 **2 **5 **5 |
**0 **0 **5 **5 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**1.7 **0.0 **6.7 **1.7 **6.7 **0.0 |
**0 | ***0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**0 **0 **0 **0 **0 **0 |
**0 **5 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**0.0 **5.0 **5.0 **5.0 **6.7 **6.7 |
**0 | ****0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**0 **0 **5 **5 **3 **5 **0 |
**5 **0 **0 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 ****0 |
**5 **0 **6 **5 **0 **2 **6 |
**0 | ****0 |
| 2BE3 **0 |
**0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) **0(gearbox) |
**5 **5 **5 **0 **2 **5 |
**0 **0 **0 **0 **0 **0 |
****0 ****0 ****0 ****0 ****0 ****0 |
**5 **5 **8 **9 **3 **5 |
**0 | ****0 |
For more information,please feel free to contact with ZS Equipment.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 999 ~ 6999 / Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 999 |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | pumps |
