Prix FOB
Obtenir le dernier prix0.65 ~ 0.66 /
|100 Piece Minimum Order
Pays:
China
N ° de modèle:
0812
Prix FOB:
0.65 ~ 0.66 / Obtenir le dernier prix
Localité:
NO.68 Yudu Road,Fan Jing Industrial Park,JiaShan,Zhe Jiang province,China
Prix de commande minimale:
0.65
Commande minimale:
100 Piece
Packaging Detail:
-
Heure de livraison:
30days
Capacité de Fournir:
10000 Piece per Week
Payment Type:
Other, T/T
Groupe de produits :
-
China
Personne àcontacter Mr. Li
NO.68 Yudu Road,Fan Jing Industrial Park,JiaShan,ZheJiang,China, Jiaxing, Zhejiang
1.no oil supply device, oil hole, oil groove
The cost of the fuel supply system, the cost of processing,
assembling, and so on, can greatly reduce the cost of
manufacturing.
2.Operation cost reduction
Greatly reduce the use of lubricating oil and equipment maintenance
costs, but also exempt from the risk caused by the shortage of
oil.
3.design time shortened
No oil can make the design, structure is greatly simplified, reduce
costs, save design time. In addition, using self-lubricating
bearings can also improve the mechanical properties and prolong get
remarkable results using life and improve the
reliability.
4.recovery and environmental protection of lubricant
No need to waste oil recycling, is conducive to environmental
protection.
EB*5 self lubricated bearings as the mechanical industry parts,
there is a certain sense of the use of. In order to make the
machine run normally, a lot of effort. The bearing is divided into
rolling bearing and sliding bearing. The general sliding bearing in
high load movement, mixed with foreign body, temperature, fuel,
maintenance maintenance is not perfect circumstances, will cause
galling. Like that of sliding bearing is not able to use harsh
conditions, metal inlaid solid self lubricating bearing wear
resistance nap, play due to the performance of bearings, mechanical
performance and free maintenance.
1.In the possible case, the design uses the standard
specification as far as possible;
2.Please note that there is no foreign body in the
assembly;
3.After using the sliding surface, formed by solid lubricant oil
film in surface with black or gray black phenomenon, please do not
scrub, as usual.
4.Before the assembly, if the lubricating oil applied to the
grinding parts, can shorten the running in period, conducive to the
operation of machinery, operation;
5.When the assembly should be slowly pressed into, it is strictly
forbidden to beat, so as to avoid damage to the bearing and
deformation;
6.Design, different parts should be selected with appropriate
material, in order to improve the mechanical performance, to extend
the service life of the bearing;
7.In the high load, reciprocating motion, the proposed use of
screw fixation;
8.In fresh water, sea water and in the sea, on the use of
stainless steel or surface plating.
Â
1. Flexible design, simple, convenient with wide
applications
The designing of oil-feeding system is both a labor consuming and
time consuming job. Therefore, the neglecting of oil-feeding
apparatus in the designing of solid Iubricant bearings saves the
cost of oil-feeding apparatus. Besides, for various specific
circumstances, the solid lubricant bearings can be designed into
various types to meet the requirements thereof. The use of solid
lubricant bearings can greatly reduce the cost of mechanical
maintenance and oil.
2. FunctionaI in absence of oiI
Since the Iinear expansibility of solid Iubricant is greater than
metallic matrix's, when the movement of solid lubricant
bearings(SLB)start, the Iubricant is transferred onto the parts in
abrasion thus realizing the self-lubrication. Therefore, the SLBs
can be used in circumstances where oiling and greasing is difficult
or impossible and they perform excellent Iubrication even under
low-speed and high Ioad circumstances.
3. Cost efficiency
The traditional mechanical designing requires frequent oiling
maintenance; oil gauge check shall be performed to ensure the
passage of oil supplying apparatus is clear. Since the periodical
oiling can cause pollution to the machines themselves as welI as to
the ambient surroundings, resulting in an increase of the
maintenance cost,the realization of self-lubrication can not only
make the environment clean but greatly reduce the Iubricating costs
as well.
4. Excellent performance under high-load, Iow-speed
circumstances
The SLBs are made of rotationaI cast high-strength copper as the
matrix, which functions as Ioad bearers.Besides, SLBs use specially
formulated graphite as Iubricant, ensuing excellent
self-lubrication. Combining the advantages of both the matrix and
Iubricant, SLBs are capable of exert their wonderfuI performance in
circumstances with high load and low speed.
5. In circumstances where it is difficult for the oiI films to
generate, such as the alternative movements, swinging movements and
frequent on-and-off, SLBs highlights their excellent resistance to
abrasion. As the principle of the arrangement of SLB Iubricant is
to ensure that each part of the equipment is involved in the
Iubrication throughout the movement, the Iocation of the Iubricant
shalI be determined according to the movement direction of the
parts in abrasion.
6. Excellent chemical resistance and corrosion resistance
The Iubricant for SLB is formulated out of the abrasion-resistant
materials such as graphite and PTEE and has stabilized molecular
structure. The metallic matrix can be selected according to the
various chemicaI resistance and corrosion resistance accordingly.
Therefore, the SLB enjoys high chemicaI resistance and corrosion
resistance.
7. The cost of the products is more competitive and compared with
other products of the same kind, the SLB features in longer service
hours, less maintenance, longer replacement period and better
performance.
You can order any size of the this kind of
bushes by contact my e-mail address .We
provide high quality graphite bushes withextremly low
price.
Â
Pays: | China |
N ° de modèle: | 0812 |
Prix FOB: | 0.65 ~ 0.66 / Obtenir le dernier prix |
Localité: | NO.68 Yudu Road,Fan Jing Industrial Park,JiaShan,Zhe Jiang province,China |
Prix de commande minimale: | 0.65 |
Commande minimale: | 100 Piece |
Packaging Detail: | - |
Heure de livraison: | 30days |
Capacité de Fournir: | 10000 Piece per Week |
Payment Type: | Other, T/T |
Groupe de produits : | - |