Prix FOB
Obtenir le dernier prix10000 ~ 150000 USD / Set ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
DN
Prix FOB:
10000 ~ 150000 USD / Set ( Negotiable )Obtenir le dernier prix
Localité:
Shandong,China
Prix de commande minimale:
10000 per Set
Commande minimale:
1 Set
Packaging Detail:
suitable sea shipping, it can put into 20GP, 40GP, 40HQ or bulk cargo
Heure de livraison:
35 days
Capacité de Fournir:
5000 Set per Year
Payment Type:
T/T, Other
Groupe de produits :
Personne àcontacter Emma
Zhengzhou, Henan
ÂÂ
Professiomal automatic plant for pressure impregnated wood apply to wood’s corrosion protection, fire retardant, mothproof, fire prevention, insect-resistant, modification, dyeing, coking, degrease and deep processing. Wide applicability, better effect of processing, big capacity. reasonable layout, safety and reliable are the advantages of this equipment. And it also have advantages of reduce labor intensity and working cost. It completely meet the requirement of deep processing of all kinds of wood.ÂÂ
1.       Initial vacuum: we need to keep the tank vacuum before filling of the wood preservative. And it will make the wood preservative into wood cells better. The vacuum degree is **9.8~*0kpa and the vacuum time is according to different product(normally ****0 minutes). when the cylinder in vacuum state, a part of air in the wood was taken out, the resistance will reduce when the wood preservative pushed into wood, so the wood preservative will be easy to get into wood cell.
ÂÂ
2.       Filling of preservative into tank: Add the wood preservative by manual valve when the equipment in vacuum state, to make sure the air which in the same condition was stopped in the wood cells. (the degree of vacuum is up to the size of valve)
ÂÂ
3.       Boost pressure stage: Begin to boost pressure lowly to 1.**1.4MPa when the preservative is full of wood tank ,then keep the pressure value until the regulation preservative into the wood.
ÂÂ
4.       Pressure relief and discharge preservative: Discharge the pressure after the regulation preservative is absorbed. There will be a little recoil phenomenon(***5%) during the process.
ÂÂ
5.       Final vacuum: Pumping air from the tank to keep the tank vacuum after the preservative discharged from the tank. The purpose is to extract excess wood preservative to reduce the  phenomenon of oil dripping.
ÂÂ
6.       Recover
atmosphere, then open the door and take out of timbers.
Contact Us
Contact person: Emma
Email: *@******************** Phone:**6 **********0
whatsapp:***6 **********0
Skype:luymachine2
Pays: | China |
N ° de modèle: | DN |
Prix FOB: | 10000 ~ 150000 / Set ( Negotiable ) Obtenir le dernier prix |
Localité: | Shandong,China |
Prix de commande minimale: | 10000 per Set |
Commande minimale: | 1 Set |
Packaging Detail: | suitable sea shipping, it can put into 20GP, 40GP, 40HQ or bulk cargo |
Heure de livraison: | 35 days |
Capacité de Fournir: | 5000 Set per Year |
Payment Type: | T/T, Other |
Groupe de produits : | wood impregnation plant |