Prix FOB
Obtenir le dernier prix( Negotiable )
|1000 Square Meter Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1000 Square Meter
Packaging Detail:
inner packed by plastic bag, outside packed by carton
Heure de livraison:
15-20days
Capacité de Fournir:
100000 Square Meter per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Ms. christina
No. 291 Shui Xi Men street, Nanjing, Jiangsu
Introduction of carbon fiber plate
Carbon fiber plate used in one of the method of carbon
fiber reinforcement method (CFRP).
This method is often used to reinforce concrete
floor, piers, bridges, pillars, chimpneys and tunnels etc
to prevent cracking/peeling of concrete.
Features
Carbon fiber plate has the following advantages over carbon fiber
cloth:
1. More suitable for prestressed reinforcement, making fuller use
of the high strength of the carbon fiber,
2. Easy installation, easy to guarantee installation quality,
3. Straight layout and allowing maximum effect of carbon fiber,
4. A layer of 1.2mm thick carbon fiber plate is equivalent to *0
layers of carbon fiber cloth,
5. More suitable to reinforce the concrete wall structure than
carbon fiber cloth.
Installation Process
1. According to the requirements, polish the area to be bonded
until the concrete surface is exposed.  Repair the
cracks/breakages/etc and cut the carbon fiber plate according to
the designed dimension.
2. Mix the correct ratio of the carbon fiber plate adhesive,
stirred evenly.
3. Wipe clean the carbon fiber plate surface (if pasting two
plates, wipe and clean both surfaces), brush on the adhesive. The
glue surface should be bulgy, with average thickness of more than
2mm.
4. Press the plate with adhesive against the polished concrete
surface, use a rubber roller to firmly roll on the plate along the
direction of the carbon fiber, ensure the adhesive are squeezed out
from both sides of the plate and there are no spaces in
between.
5. When pasting two layers of carbon fiber plate, paste
continuously. If not, clean the bottom plate again before
pasting.
6. Remove the excess glue on both sides of the carbon plate. Clean
the surface of the plate, coat the protection surface according to
requirements.
7. When pasting several carbon fiber plates in parallel, the gap
between the two plate should not be lesser than 5mm.
|
Specification and technical parameter of carbonfiber plate |
||
| ITEM | MKT-I | MKT-II |
| Thickness (mm) | 1.2/1.4 | 1.2/1.4 |
| Carbon fiber type | T******2k | T******2k |
| Tension strength (MPa) | ≥***0 | ≥***0 |
| Elongation at break (%) | ≥1.7 | ≥1.6 |
| Fiber volume content (%) | ≥*5 | ≥*5 |
| Elasticity modulus resistance | ≥1.*5×*0^5MPa | ≥1.4×*0^5MPa |
| Width (mm) | *0/**0 | *0/**0 |
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1000 Square Meter |
| Packaging Detail: | inner packed by plastic bag, outside packed by carton |
| Heure de livraison: | 15-20days |
| Capacité de Fournir: | 100000 Square Meter per Month |
| Payment Type: | T/T |
| Groupe de produits : | carbon fiber |
