CAN to Fiber Optic

La description

Features and Benefits converter from ISO ******2 to fiber optic cable CAN 2.0A and CAN 2.0B supported CAN transfer rate up to 1 Mbps 3KV Galvanic isolation protection, 2.5KV Signal isolation protection. LED for transmit/receive status on each port Optional **0 ohm terminal resistor for CAN bus network Extended operating temperature range from **0 to *5 °C Overview The CANFiber***0 is used for the conversion of the CAN signal from copper wire (ISO ******2) to fiber optic cables. This provides a complete isolation and protection against EM-influences. For creating star or tree topologies, several CANFiber***0 can be connected to a CAN-hub via the integrated backbone bus (also in conjunction with CANFiber***0). One special feature of the repeater is, that it separates a defective segment from the rest of the network, so that the remaining network can continue working. After elimination of the defect, the segment is switched into the network again.
Fiber communications 1 channel fiber port 1 or 2 fiber Connectors,ST/SC/FC selectable Optical wavelength **0nm、***0nm、***0nm Fiber mode multi-mode: *2.5/**5um; single-mode: 9/**5um Fiber transmission distance 0 to 4km with multi-mode; 0 to *0km with single-mode CAN Specification CAN 2.0 A/B CAN Specification CAN 2.0 A/B Transfer Rate 1 Mbps Signal Support CANH，CANL，GND Connectors 1 channel,OPEN6 Optical Isolation ***0V DC-DC Isolation，***0V Signal isolation Config soft CANFiberConfigTools configuration software Config connect usb port Power supply *9V～**4V DC Power connect open6 connects Standby power supply Via USB port Power Consumption *@********************erature **0 to *5°C Storage Temperature **0 to *5°C Dimensions **0mm x *0mm x *5mm

Ordering
CANFiber***0SSsingle fiber & single-mode CAN/fiber convert
CANFiber***0SM
single fiber & multi-mode CAN/fiber convert
CANFiber***0MS
double fiber & single-mode CAN/fiber convert
CANFiber***0MM
double fiber & multi-mode CAN/fiber convert