Prix FOB
Obtenir le dernier prix5 ~ 6 / Piece
|1616 Square Meter Minimum Order
Pays:
Turkey
N ° de modèle:
-
Prix FOB:
5 ~ 6 / Piece Obtenir le dernier prix
Localité:
Turkey
Prix de commande minimale:
5 per Piece
Commande minimale:
1616 Square Meter
Packaging Detail:
Strongly packaged.
Heure de livraison:
2-3 weeks
Capacité de Fournir:
500000 Piece per Month
Payment Type:
T/T
Groupe de produits :
Turkey
Personne àcontacter Burak Nergis
Istanbul, Istanbul
GLASROC X SHEATHING BOARD *2.5MM
ÂÂ
ÂGlasroc X Sheathing Board *2.5mm is a high performance gypsum sheathing board with mould resistant properties.
ÂÂ
ÂWHERE TO USE
Â
Use it to provide external weather protection to Steel Frame System
(SFS) constructions prior to the installation of the finished
exterior façade system.
Â
ÂCOMPOSITION
Â
This product is made up of a gypsum board with a glass fibre mat
reinforcement which has inherent mould resistant properties. The
mat protects the board with its hydrophobic coating, and has
additional UV resistant properties.
Â
ÂPERFORMANCE
Â
Here we only provide performance information related to the
product. Please see the White Book for system-dependent
performance.
EFFECT OF CONDENSATIONÂ
The thermal insulation and ventilation requirements of national
Building Regulations aim to reduce the risk of condensation and
mould growth in new buildings. However, designers should take care
to eliminate all possibility of problems caused by condensation,
particularly in refurbishment projects.
CUTTING
Either cut the board with a plasterboard saw, or score the front
face with a sharp knife, snap it over astraightedge. Cut holes for
things like socket boxes using a utility saw.
JOINTINGÂ
To maintain optimum performance, apply Glasroc X Sealant into the
joint ensuring good contact is made with the sides of the joints,
and ensuring continuity of the seal where required. Tooling can be
carried out within *0 minutes if necessary, using a wet tooling
stick, trowel or spatula. Surplus sealant can be removed if
necessary within *0 minutes using a damp cloth or sponge.
Â
ÂFIXING
Â
Fix the board with the decorative side facing outwards to receive
finishes. Install fixings at least *3mm from cut edges and *0mm
from bound edges. Position cut edges at internal angles wherever
possible. Stagger horizontal and vertical joints between layers by
at least **0mm.
SNAGGING AND MINOR REPAIRS
To maintain all performance requirements it will normally be
necessary to replace a damaged board; please contact our Technical
Support Team for specific advice.
Â
ÂSTORAGEÂ
Â
Boards should be stored on a firm, flat and level surface. If the
boards are temporarily stored outside they should be kept clear of
the ground and securely covered with an anchored polythene sheet or
tarpaulin to protect from dampness and inclement weather.
HANDLING
Please refer to the HSE Manual Handling Operations Regulation for
best practice guidance when handling or installing this
product.
SAFETY DATA SHEET
Safety Data Sheet (SDS) available.Â
Â
ÂPACKAGING OVERVIEW
Â
Supplied on a reusable wooden pallet.
RECYCLABILITY
Â
You can recycle this product as long as it has minimal
contamination from non-gypsum materials.
DISPOSAL
Segregate boards from non-gypsum waste for recycling where
possible. Dispose of them according to local authority
requirements.
BES ***1 CLASSIFICATION
Good.
Â
ÂSTANDARTSÂ
Â
EN ******1:***8+A1:***9, Type GM-F & GM-H1.
BBA: *7/***3.
Declarations of Performance (DoP) available
Â
Pays: | Turkey |
N ° de modèle: | - |
Prix FOB: | 5 ~ 6 / Piece Obtenir le dernier prix |
Localité: | Turkey |
Prix de commande minimale: | 5 per Piece |
Commande minimale: | 1616 Square Meter |
Packaging Detail: | Strongly packaged. |
Heure de livraison: | 2-3 weeks |
Capacité de Fournir: | 500000 Piece per Month |
Payment Type: | T/T |
Groupe de produits : | Drywall Materials |