La description
Product Description
Led T8 Tube 0.9M *2W
1.Model: TPL-T*0.9M**2W
2.CE&ROHS certification
3.3years warranty
Specifications:
Length:*0cm
Power:*2w
Voltage:AC*****5V
Beam angle:**0 degree
PF:*5%
LED light source:***8 high brightness smd led, Epistar chip.
6.**7lm per led
Warranty:3 years
Pure white:********0K ***0lm
Neutral White:********0K ***0lm
Warm white:********0K **0lm
Â
Product Feature
LED Tube Light *-Features:
1.5years of life ****0H
2.No flash.instant start
3.No radio frequency interference
4,Anti-electromagnetic interference
5.Fast start,no flicker,no different sound
6.Fast start,no flicker,no different sound
7.LED design integration a special perspective
8.Mercury and lead and other hazardous substances,comply with
RoHS standard,LED lamp is recognized as the twenty-first
century,the green lighting.
9.Constant current,high efficiency(*0%)with a new thermal
protection within the drive,you can work under unstable
voltage
*0.Special circuit design,each LED can be separated pieces of
work,avoiding the damage of single LED lamp working correctly
Product Specification/Models
T8 LED Tube Light Installation Instruction:Step 1Find out what
your light fixture type is? There are two types, one using
magnetic (inductive) ballast, let us call it MAGNETIC BALLAST
TYPE. The other one using Electronic ballast. Let us call it
ELECTRONIC BALLAST TYPE.The easiest way to tell which light
fixture you have is by looking for a 'starter' The MAGNETIC
BALLAST TYPE has 'starter' while the ELECTRONIC BALLAST TYPE
does not.
Step 2Turn power off before installation. Wiring the fixture to
use the LED tubes is simple, but should be performed by a
qualified person.For MAGNETIC BALLAST TYPE, only remove the
starter from light fixture; do not need to remove ballast. Also
you can remove starter and ballast if it is convenient.For
ELECTRONIC BALLAST TYPE, remove/bypass the electronic ballast
from light fixture. Do not install the LED tube without
removing/bypassing the electronic ballast as damage to the LED
tube may occur.
Step 3Install T8 LED tube light to the light fixture. Turn power
on.Show you in Sketch
(a) ELECTRONIC BALLAST TYPE, Electronic ballast
removed/bypassed
The two pins at each end of the LED tube are connected together.
Simply apply one side of the **0 Volts (or **0 Volts) AC to one
end of the tube (either pin) and the other side of the **0 Volts
(or **0 Volts) AC to the other end. Power can be applied to
either pin.
(b) MAGNETIC BALLAST TYPE, Starter removed
(c) MAGNETIC BALLAST TYPE, Starter and ballast removed
Notes: Safety First!- All electrical work should be undertaken by
an electrician who is fully qualified and registered. When
installing LED Tubes please ensure that appropriate health and
safety precautions are taken, including ensuring that the light
fixture is properly isolated before commencing work.Under no
conditions: DO NOT connect power (positive & negative) to the
two pins at one end only. If they are connected together
(positive/negative): you will create a short circuit!Installation
of LED Tubes to a fitting that has not been modified in
accordance with the above instructions will result in
damage/Failure of the tube. Incorrect modification of the fitting
may also result in damage/failure of the tube. Either of the
above will invalidate the warranty.
Application
1.Home lighting2.Office lighting3.Retail lighting4.Hotel &
restaurant lighting5.High ceiling lighting6.Commercial and
industrial lighting
Other Information
Guarantee
1. *2 months Manufacturer's limited warranty for defective items
(excluding items damaged and/or misused after receipt).
Accessories come with a *-month warranty.
2. Defective items MUST BE reported and returned within the
warranty period (and in the original packaging, if possible). You
must tell us what the defect is and give us your order number. WE
DO NOT REPAIR OR REPLACE ITEMS WITH EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on
aliexpress!
Feedback
We maintain high standards of excellence and strive for **0%
customer satisfaction! Feedback is very important. We request
that you contact us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your
concerns.
Our Service1)Your inquiry related to our products or prices will
be replied in *4hours.2)Well-trained and experienced staffs to
answer all your inquires in fluent English3)OEM and ODM,any your
customized lightings we can help you design put into
product4)Distribute ownership are offered for your unique design
and some our current models5)Protection of your sales area,ideas
of design and all your private information.
| Pays: |
China |
| N ° de modèle: |
TPL-T80.9M-12W
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China |
| Prix de commande minimale: |
- |
| Commande minimale: |
25 Piece |
| Packaging Detail: |
Carton |
| Heure de livraison: |
2weeks |
| Capacité de Fournir: |
2000 Piece per Day |
| Payment Type: |
T/T, Western Union, Money Gram, PayPal |
| Groupe de produits : |
Led T8 Tube Light
|
