Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
ES-20P
Prix FOB:
Localité:
Shanghai
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
WOODEN PACKAGES
Heure de livraison:
30-60 DAYS
Capacité de Fournir:
5 Set per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Denise
Shanghai Qingpu Industrial Park, Shanghai, Shanghai
Structure introduction
The precision preformer is composed of a ram extruder and a rubber
blank cutter attached to the ram head. It is also equipped with
hydraulic, vacuum, heating, pneumatic and electrical system. While
in operation, the first step is to open the ram head and add the
preheated prehensile rubber material into the machine from anterior
part of the barrel. After that, the ram head is to be closed to
adjust the extruding and cutting speed (volume control chart is
provided with the machine). Eventually, after vacuumization and
cutting, the rubber blank with precise weight will then be
obtained.Â
1. Extruding device: It is composed of hydraulic cylinder, batching
barrel and
ram head.
2. Hydraulic device: This device is selected with high-pressure
gear pump and YUKEN flow valve imported from Japan. Hydraulic oil
in hydraulic cylinder is controlled by the flow valve and the
pressure difference prior to and after throttling is controlled at
a constant value so as to ensure the precise weight of the rubber
blank extruded. This device is equipped with cooling system driven
by 2 sets of hydraulic axletrees which can make reasonable and
effective use of energy and control the temperature of the
hydraulic oil.
3. Pneumatic device: It is used to open and close the ram head as
well as control the movements of other devices, for example, the
cylinder.Â
4. Vacuumizing system: Before extruding and cutting of rubber
material, the vacuumization aims at eliminating the air remained
inside the barrel and the ram head as well as the gas contained in
the rubber material so as to improve the quality of sulfur products
to be produced in the following process.Â
5. Heating system: With the adoption of water circulation heating
method, the temperature is controlled and displayed by the digital
thermostat which can effectively maintain the constant temperature
of the ram head and the barrel.Â
6. Cutting device: It is composed of frame, electromotor and
deceleration system, which can conduct speed transmission via
four-speed motor gearbox and frequency conversion motor. In
addition, there is also a transmission system installed under the
frame.
Â
| Pays: | China |
| N ° de modèle: | ES-20P |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | Shanghai |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | WOODEN PACKAGES |
| Heure de livraison: | 30-60 DAYS |
| Capacité de Fournir: | 5 Set per Month |
| Payment Type: | T/T |
| Groupe de produits : | Rubber processing machine |
