Bare Conductor (AAC/ACSR/AAAC/ACAR/AACSR/ACS/GSW) By Henan Jiapu Cable Co., ltd,

SpÃ©cification du produit

Brand Name: Jiapu
Insulation Material: none
Application: Overhead
Conductor Material: Aluminum
Jacket: none

La description

1. All Aluminum Conductor(AAC)

Application
The conductors are suitable for use in spans on wood poles, transmission towers,and other structures where tensile strength and temperature ratings are not required. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises.
AAC(All aluminum conductor) is the most economical bare overhead conductor due to its lighter weight. It offers easier handing during installation and use of simpler fittings. The conductor is corrosion resistant due to its homogeneous construction.

Construction
Aluminum ***0 wires are concentrically stranded and wrapped helically around a central wire. Each successive layer has six wires more than the previous underlying layer. Outer layer is right hand lay and reversed in successive layers.

Standard of Production
1.ASTM B**1 Standard, refer to the following specification
B **0 Aluminum Wire ****-H *9 for Electrical Purpose
B **1 Aluminum Conductor, Concentric-lay-stranded
B **0 Compact Round Concentric-lay-stranded Aluminum ***0 Conductor
2.CSA C *9 Standard
3.BS **5 Part 1 Standard
4.DIN ****1 Standard
5.IEC ****9 Standard
6. Other International Standard

2. Aluminum Conductor Steel Reinforced(ACSR )

Application
The conductors are suitable for use in all practical spans on wood poles, transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises.
ACSR(Aluminum Conductor Steel Reinforced) has a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative.

Construction
Aluminum ***0 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.

Standard of Production
1.ASTM B**2 Standard, refer to the following specification
B **0 Aluminum Wire****-H *9 for Electrical Purpose
B **1 Aluminum Conductor, Concentric-lay-stranded
B **2 Aluminum Conductor,Concentric-lay-stranded, Coated Steel Reinforced (ACSRï¼‰
B **1 Aluminum Coated Steel Core Wire for Aluminum Conductor Steel Reinforced(ACSR/AW)
B **8 Zinc-coated Steel Core Wire for Aluminum Conductor Steel Reinforced (ACSR/AZ)
B **0 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductor Steel
Reinforced (ACSR)
2. CSA C *9 Standard
3. BS **5 Part 2 Standard
4. DIN ****4 Standard
5 IEC ****9 Standard
6. Other International Standard

3. All Aluminum Alloy Conductor(AAAC)

Application
Used as bare overhead conductor for primary and secondary distribution. Designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance to corrosion than ACSR.

Construction
Standard ****-T*1 high strength aluminum conductors, conforming to ASTM Specification B***9, are concentric-lay-stranded, similar in construction and appearance to ***0 grade aluminum conductors. Standard ***0 alloy conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. They were developed to fill the need for an economical conductor for overhead applications requiring higher strength than that obtainable with ***0 grade aluminum conductors, but without a steel core. The DC resistance at *0 °C of the ****-T*1 conductors and of the standard ACSR of the same diameter are approximately the same. Conductors of the ****-T*1 alloys are harder and , therefore, have a greater resistance to abrasion than conductors of ****-H*9 grade aluminum.

Standard of Production
1.ASTM B**9 Standard, refer to the following specification
B **8 Aluminum Alloy ****-T*1 Wire for Electrical Purpose
B **9 Concentric-lay-stranded ****-T*1 Aluminum Alloy Conductor
2.BS ***2 Standard
3. BS EN****3 Standard
4. DIN ****1 Standard
5 IEC ****9 Standard
6. Other International Standard

4. Aluminum Conductor Alloy Reinforced(ACAR)

Application
The aluminum conductor alloy reinforced(ACAR) is an excellent conductor choice where current carrying capacity,higher strength and a lower conductor weight are critical to the line design.

Construction
The aluminum conductor alloy reinforced(ACAR) has concentrically stranded aluminum ****-H*9 wire around a ****-T*1 aluminum alloy core. Typically, the ****-T*1 is the conductor core,but in certain designs, the ***0 H*9 and the ****-T*1 wires may be stranded in the same layer.

Standard of Production

ASTM B**4 Standard, refer to the following specification

B **0 Aluminum Wire ****-H *9 for Electrical Purpose
B **8 Aluminum Alloy ****-T*1 Wire for Electrical Purpose
B **4 Concentric-lay-stranded Aluminum Conductor, Aluminum Alloy Reinforced ACAR ***0/***1
2. IEC ****9 Standard
3. Other International Standard

5. Aluminum Alloy Conductor Steel Reinforced(AACSR)

Application
The AACSR conductors are also suitable for use in all practical transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR.
AACSR(Aluminum Alloy Conductor Steel Reinforced) has also a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative as like as ACSR.
Compared with ACSR ,the tensile strength of aluminum conductor is more strong .

Construction
Aluminum Alloy ***1 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.

Standard of Production

ASTM B**1 Standard, refer to the following specification

B **8 Aluminum Alloy ****-T*1 Wire for Electrical Purpose
B **1 Concentric-lay-stranded Conductor,Aluminum Alloy Steel Reinforced(AACSR)
B **1 Aluminum Coated Steel Core Wire for Aluminum Conductor Steel Reinforced(ACSR/AW)
B **8 Zinc-coated Steel Core Wire for Aluminum Conductor Steel Reinforced (ACSR/AZ)
B **0 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductor Steel
Reinforced (ACSR)
2. DIN ****6 Standard
3. IEC ****9 Standard
4. Other International Standard

6. Aluminum Clad Steel Wire/Strands(ACS)

Application
The stranded aluminum clad steel wires are suitable for the aerial transmission line as overhead ground wire of carrier. They are with low resistance and high strength.
This kind of products also have four major advantages of excellent corrosion resistance, no battery effect, light-saving, flexible design and so on.

Construction
Aluminum clad steel wires are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.

Standard of Production
1.ASTM B**5 Standard
2. ASTM B**6 Standard
3. DIN****1 Standard
4. Other International Standard

7. Galvanized Steel Wire/Strands(GSW)

Application
The galvanized single steel wires or stranded steel wires are suitable for cores of ACSR to improve its tensile strength. And they can also be used in the aerial transmission line as the line material of ground connection to avoid the lightning strike.

Construction
The single wires are concentrically stranded and wrapped helically around a central wire.

Standard of Production

ASTM A**5 Standard
ASTM A **3 Standard
BS **3 Standard

4. Other International Standard

Pays:	China
N Â° de modÃ¨le:	AAC/ACSR/AAAC/ACAR/AACSR/ACS/GSW
Prix FOB:	0.1 ~ 1 / Meter ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	0.1 per Meter
Commande minimale:	1000 Meter
Packaging Detail:	wooden drums
Heure de livraison:	10-15days
Capacité de Fournir:	5000 Kilometer per Month
Payment Type:	Other, PayPal, Money Gram, Western Union, L/C, T/T
Groupe de produits :	bare conductor