Prix FOB
Obtenir le dernier prix( Negotiable )
|100 Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
100
Packaging Detail:
-
Heure de livraison:
7 to 30 days
Capacité de Fournir:
10000 Piece per Month
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
Personne àcontacter Mr. Fang
315th Tongning Road,Hongtang,Ninngbo,China,315033, Ningbo, Zhejiang
~Automatic Sensor and manual combined faucet ***9
Product Name: Sensor and manual combined faucet ***9
Model NO.: ***9
Origin: Ningbo China
Delivery Time: ***0days or negotiable
Minimum Order: **0PCS
Supply Ability: *0,**0Pcs/Monthly
Product Details:Â Sensor and manual combined faucet ***9
Features:
Integrated faucet, sensor and manual combined. Sensor and manual
model be switched by the below the sensor.
Faucet body made of high quality brass, supremely accurate
machining; process with precise surface finish,such as
polish,nickel coated and chrome coated, the working life is
guaranteed.
The water temperature adjusting handle is designed to meet with
requirements of hot and cold water adjustment.
Bi-stable solenoid valve is installed inside, construction is
ingenious.
 Outside connected battery box for a convenient changing
between AC,DC and AD.
Designed with SCM. Stop water automatically when water
flowing exceed 1 minute. Induce distance can be adjusted free of
touching.
Instructions for use:
Sensor/flow test.
When the unit is powered on, water should flow immediately when
you put your hands within range of the sensor. When you remove
your hands out range the water should stop immediately.
The maximum duration of continuous flow is 1 minute.
Sensor range
The default factory set distance is *2~*5 cm. When powered
on for the first time, place your hands at the desired
distance within 5 seconds after the power has been switched on
and remove your hands after approx 2 seconds in order to change
the factory setting.
To reset the setting, interrupt power for at least *0 seconds and
follow the procedure as described to set the sensor range
correctly
Strainer
To prevent blockage please clean the strainer regularly, make
sure you shut of the water mains, unscrew the water inlet hose,
remove the strainer, clean with water and a soft brush.Â
Then install the items in reverse order, turn on water mains and
check for leakage.
Battery Change:
The indicator light in the sensor will flicker 3 times per second
to indicate the batteries are at the end of their useful life. At
this stage the unit will not operate in battery moreÂ
anymore
Please make sure you install the batteries in the right
direction, the + and - side are indicated in the battery
holder.
Close the battery holder, place the cover back in place and
tighten the screws.
Follow the instructions for setting the sensor range if required.
 Problem:
The unit does not work. Please check for power connection
or replace the batteries, check connection of the sensor
cable.
There is power however no water flow,
Please check the water supply, open any closed valves if
necessary
Check water connections for blockage, clean if necessary
Check Strainer for Blockage, clean if necessary
Disconnect power for *0 seconds and re install
Check water connections for twists
Check sensor cable connection
Clean the sensor with a soft cloth
Caution:
Please handle the product with care whilst installing
Only clean with soft cloth, no abrasive cleaning agent, acidulous
cleaning agents.
Do not spray the control box with water.
Only clean the sensor with a soft cloth, scratching will reduce
the range and sensitivity of the unit itself.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 100 |
| Packaging Detail: | - |
| Heure de livraison: | 7 to 30 days |
| Capacité de Fournir: | 10000 Piece per Month |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | Sensor faucet |
