1.It adopts a special liquid heating system to heat the sample. It can ensure the safety of test. The heating power can be 

adjusted continuously.

2.Desktop structure. Stainless steel working bench and outer shell of heating furnace.

3.All parts are ready. User can do test as long as equipping civil gas and other natural gas.

1. Power supply: AC（**0±*0%）V, *0Hz.

2. Sample cup: Metal crucible, *7mm in depth，Ф*4mm in upper mouth diameter，Ф*8mm in lower mouth diameter. 

There is a scale line at a distance of 3.2 from upper edge.

3. Heat preservation liquid cup: 0.3 high quality carbon structure steel. Inner diameter of upper mouth is Φ**0mm±5mm; 

The height is (*0±5)mm, Inner diameter of bottom is Φ*6mm±2mm.

4. Igniter: It is composed of gas inlet pipe, flow rate adjusting valve and flame comparing ball. The diameter of spout is 

Ф0.7mm～0.8mm, Operator can adjust the flame to a ball with diameter 4mm.

5. Sample heat: The liquid heating system is composed of heating furnace, heat preservation liquid cup and sample cup. It 

can control the heating rate by heat regulator as per requirements.

6. Thermometer: 0℃～＋**0℃，scale division is 1℃.

7. Measure gauge: Thickness is 3.2mm. There are two protuberances size 3.2±0.*5mm. There is a Ф4.0mm hole and a 

Ф0.8 hole 3.2mm from the bottom.

8. Ambient temperature: ≤*5℃。

9. Relative humidity: ≤*5ï¼…