Prix FOB
Obtenir le dernier prix30 ~ 38 USD / Piece
|10 Piece Minimum Order
Pays:
China
N ° de modèle:
AT007
Prix FOB:
30 ~ 38 USD / Piece Obtenir le dernier prix
Localité:
china
Prix de commande minimale:
30 per Piece
Commande minimale:
10 Piece
Packaging Detail:
15*10*5
Heure de livraison:
7day
Capacité de Fournir:
20000 Piece per Month
Payment Type:
T/T, Western Union, Other
Groupe de produits :
Personne àcontacter lin
HUA QIANG BEI ROAD .FU TIAN QU SHENZHEN .CHINA, Shenzhen, Guangdong
This product is a HD video recorder with simple operation or with
Motion detection, It can record HD Video,Photo and Audio. elegant
design, small size, it is easy to carry. It is an essential utility
in business, education, security, media, justice, tourism, health
care, living and other field.
Â
~ Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you
use it the first time, please charge firstly. The method for
charging as following:
1.) Use adaptor: connect 5V charger plug with USB cable, then
plug into electrical connector receptacle, it can be charged.
2.) Connect computer: use USB cable to connect the computer, then
it can be charged.
3.) When you charge it, the Led indicator will keep flashing.When
the Led indicator bright, means the machine finished
charging.
4.) At this time,if the TF card capacity is enough,the machine
can record video about **0 minutes，or can record longer
separate recording.
Notice: when battery power is not enough, the machine will enter
into protection mode, so it cannot be turn on. Please charge for
it.
2. Operation Guide
1) Power on:
Please confirm already insert the TF card in the slot.
Press Start to POWER ON, long press start , the red
light lit, enter the standby mode.
No memory card: red and blue lights flash five times
simultaneously shut down.
Memory card is full: red and blue lights flash simultaneously
eight times shutdown.
2) Mode : each press this once, can be switched to
the various operating modes,when the power on and enter the
standby mode:
press this once,into->â‘ normal Video mode
(power-on default standby);
press this Twice,into-> â‘¡ Photo mode;
press this Three times,into-> â‘¢ Audio recording
mode;
press this four times,into-> â‘£ Motion Detection
mode;
press this five times, again into-> â‘ normal
Video mode -> ...... (each press one time, the camera to the
above order cycle to the next corresponding standby)
3) Normal video mode:
 After power on,The default access into normal Video mode,
then red light lit, blue light turns off.
At this point a short press the Start , the red light
flashes three times then turns off, start video recording.
In the recording process, press the Start again to stop
recording and save the video file. Red light lit, back to normal
Video mode standby.
4) Photo mode:
 When in the normal Video mode standby, short press Mode
once, the red light flashes once lit, blue light is off,
enter the Photo mode standby.
At this point a short press the Start , the red light
flashes once, it take a photo, and red light lit, back to photo
mode standby.
5) Audio recording mode:
When in the Photo mode standby, short press Mode , the red
light is off, the blue light lit, into Audio recording
standby.
 At this point a short press the Start , the blue
light flashes three times then goes off, into Audio recording
state.
During Audio recording, press the Start again to stop
recording and save the audio file, the blue light lit, back to
Audio recording standby.
6) Motion Detection Mode:
 When in the Audio recording standby, short press Mode
, red and blue lights lit ,into Motion Detection
standby.
 Motion Detection: Short press the Start , red and
blue lights flashes three times,and then dual lamp goes out, into
motion detection recording state.
(When motion,it recording two minutes a fragment, whether it have
or no recording video, the light are kept off state)
In the Motion Detection recording process, press the Start
once, stop and save the video file, then dual-lamp lit, back to
Motion Detection standby.
7) In all of these modes, if it is in standby mode, press the
Mode once you can switch to the next mode.
If it is not in the standby state, would like to know what the
camera is in working condition, you can by a short press Mode
once, the corresponding indicator will blink, and the
corresponding working conditions are as follows:
Â
Normal Video recording: Red light flashes three times then turns
off.
Audio recording: Blue light flashes three times then turns
off.
Motion detection: Red and blue lights flashes three times then
turns off.
Â
3. Power off
Under standby mode, please press Strar about 2 seconds,
then release till the led indicator goes out. Then the machine is
turned off.
Â
~Parameters
ITEEMÂ PARAMETERS
Image Sensor 1/4COMS
Video format AVI
Video encoding M-JPEG
Video resolution HD***0***0P/ HD***0****0P
Video frame rate *0fps
Media playing software Attached software of the operating
system or Mainstream audio and video media playing software
Photo encoding JPG ***0****0
Supporting Windows me/***0 XP ***3/vista/Mac OS*0.4
Work time Around **0 minutes
Charging voltage DC*5V
interface type Mini 5 PIN USB2.0
Memory card Micro TF card
battery capacity **0mAh
Battery type High-capacity lithium polymer
| Pays: | China |
| N ° de modèle: | AT007 |
| Prix FOB: | 30 ~ 38 / Piece Obtenir le dernier prix |
| Localité: | china |
| Prix de commande minimale: | 30 per Piece |
| Commande minimale: | 10 Piece |
| Packaging Detail: | 15*10*5 |
| Heure de livraison: | 7day |
| Capacité de Fournir: | 20000 Piece per Month |
| Payment Type: | T/T, Western Union, Other |
| Groupe de produits : | Mini camera |
