Prix FOB
Obtenir le dernier prix( Negotiable )
|500 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
500 Piece
Packaging Detail:
Wooden
Heure de livraison:
25 days
Capacité de Fournir:
20000 Piece per Month
Payment Type:
T/T, L/C, Western Union
Groupe de produits :
-
China
Personne àcontacter Baron
Jiya Industrial Park Dongpu Village, Dongguan, Guangdong
Aluminum parts processing aluminum alloy parts
machining process can be rough, finishing separately, after the
completion of roughing, the parts heat treatment, cutting stress
and residual stress in parts of the full release, and then
finishing, machining quality will get greatly improved, the
implementation of roughing and finishing apart are the following
advantages:
(1)
To reduce the influence of
residual stress on Machining Distortion. After the completion of
roughing, roughing thermal treatment will produce stress parts
removed, so you can reduce the stress on the quality of
finishing.
(2)Improve
the machining accuracy and surface quality. Rough, separated after
finishing, finishing and processing only a small margin, the
processing of stress and deformation of small, can greatly improve
the quality level of parts.
(3)
Improve production
efficiency. Since roughing only remove excess material, leaving
sufficient margin for the finishing, but more so to consider
dimensions and tolerances, to effectively play different types of
machine performance, improve cutting efficiency.
(4)
Aluminum alloy parts after
machining, sheet metal processing within the organizational
structure will change significantly, coupled with the impact of the
cut motion, resulting in a large residual stress, in order to
reduce the deformation of parts, material needs to be the full
release of residual stress.
(5)
Aluminum alloy parts commonly
used low-temperature annealing heat treatment. Low temperature
annealing temperature is generally between **0 to **0 degrees
Celsius, lower than the recrystallization temperature will not
affect the strength and hardness of parts; low-temperature
annealing stress relief can be achieved through appropriate
performance requirements of holding time, but returned after the
heat treatment of low temperature Chi can remove the stress most
part, can not hundred percent removal of residual stress on the
parts processing deformation impact is relatively
small.
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 500 Piece |
| Packaging Detail: | Wooden |
| Heure de livraison: | 25 days |
| Capacité de Fournir: | 20000 Piece per Month |
| Payment Type: | T/T, L/C, Western Union |
| Groupe de produits : | - |
