Alloy Bars By Zhongyuan International Group Co., Limited,

Alloy Bars

Prix FOB

Obtenir le dernier prix

1000 ~ 1250 USD / Metric Ton

20 Metric Ton Minimum Order

Pays:

Hong Kong

N Â° de modÃ¨le:

Prix FOB:

1000 ~ 1250 USD / Metric Ton (Negotiable) Obtenir le dernier prix

LocalitÃ©:

China

Prix de commande minimale:

1000 per Metric Ton

Commande minimale:

20 Metric Ton

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

1000 Metric Ton per Month

Payment Type:

D/P, T/T

Groupe de produits :

Forgings

Steel Grade: 4140, 42CrMo
Standard: EN
Dimensions: Dia 150mm - 900mm
Brand Name: ZYICO
Technique: Forged
Alloy Or Not: Is Alloy
Type: Alloy Steel Bar

La description

Chemical Requirements:
Analysis on cast. To be in accordance with table below

Required									For Information only Recomme ndation
C	Mn	Si	P	S	Cr	Mo	Ni	Al	H
0.4/0.*3	0.5/1.0	0.5/0.5	≤0.**5	≤0.**5	0.0/1.0	0.5/0.5	≤0.*5	0.2/0.5	≤2ppm
Note: Mn aim 0.9 min, P: 0.1 min, S: 0.1 min, Cr 0.5 min, Mo: 0.0 min, P+S: 0.*4 max.

Mechanical Properties Required :
On material at the time of supply.

- Sampling:
Material shall be test per heat and per heat treat load, once Tensile and Three impact.
Test practice in accordance with ASTM A *****3 and ASTM A***4 CL BC, test specimens shall taken with the longitudinal axis located at 1” bellow surface.

Surface	Yield/Re 0.2% offset	Tensile/Rm	2” Elongation	Area Red.	Charpy V	Note
BHN	PSI	PSI	A %	Z %	Ft-lbs	1KSI=6.**5MPa
******1	0,0	0,0	≥*4	≥*5	*6 J	1ft-lbs=1.**6J
Report 0.6% eul for inform only
Surface hardness aiming for ******1 BHN
5.4 MM sub surface cheking at least 4” or 2 mm from end of bar: ***0BHN, aiming for ****2BHN

General requirements:

Forging reduction ratio:≥4:1
Austenite grain: As per ASTM E***-latest, grade **8
Guarantee no crack, no flake, no shrnk hole, no pin hole
Mercury free: non radioactive, no welding. Decarburization is allowed for the RT and then QT bars.
Hardenability: as per ASTM A*****0, J*-J*2, testing is to be carried out in accordance with the ASTM A*****3 on speciments make from re- forged square or round samples ****5mm in diameter.

Non-metal inclusion: As per ASTM E**-latest method A:

	A Heavy	A Thin	B Heavy	B Thin	C Heavy	C Thin	D Heavy	D Thin
	2.0 max	2.0 max	1.5 max	2.0 max	1.0 max	1.5 max	1.0 max	1.5 max
Aim for	0.5 max	1.0 max	1.0 max	1.5 max	1.0 max	1.5 max	1.0 max	1.5 max

Surface condition: rough turned, required a surface finish of **0 RMS or better
End hole: removed the ends holes.
Dia. Tolerance: *0/*2mm.
Out of roundness: within 1.9 mm. Straightness: max. 2mm/m.:≤1.9mm, 2mm/m.
Forged Bars surface grinding allowed, Must not remove surface bellow nominal diameter.

Material shall be untrasonic tested in accordance with ASTM A**8 4mm FBH.
In accordance with API 6 A PSL 3 and EN ****8 Class 3, gu

Pays:	Hong Kong
N Â° de modÃ¨le:	-
Prix FOB:	1000 ~ 1250 / Metric Ton (Negotiable) Obtenir le dernier prix
LocalitÃ©:	China
Prix de commande minimale:	1000 per Metric Ton
Commande minimale:	20 Metric Ton
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	1000 Metric Ton per Month
Payment Type:	D/P, T/T
Groupe de produits :	Forgings