ALABINE SVB Series Special Inks

La description

ALABINE SVB Series Inks (特种塑料专用油墨) Ⅰ、Description (产品描述) ALABINE SVB series inks, which prepared with special mixed-resin, extra fine fillers and pigments, and so on, are not only feeling fine and smooth, but also of good leveling and printability. The after-treatment on the presswork is feasible, such as punching, drilling, cutting, etc. The film is alcohol resistant， chemical resistant and sterilization resistant. ALABINE SVB系列油墨由特种树脂、超细颜填料等配制而成。该产品色彩细腻，流平性和印刷性非常优秀，后加工适应性也特别理想，如冲压、钻孔、切割等；涂膜耐酒精耐化学溶剂耐蒸煮。 Ⅱ、Recommended Application (推荐应用) ◆ Recommended substrate: Harden PC, harden PMMA, the surface of UV coating, electroplating layer, etc. ◆ Recommended for: Windows screens, the phone keypad, the phone shell, etc. ◇ 适用基材：加硬PC，加硬PMMA，UV漆面，电镀面等 ◇ 推荐用途：视窗屏，手机按键，手机壳等 Ⅲ、Proposed Operation (操作建议) Prepare: To clean the surface with ALATIVE SC5 treater and make sure non-dust, non-grease. To dilute the Ink with ***0% ALATIVE SR6 thinner（In order to regulate the drying rate of ink , please make use of ALATIVE RR6 dry retarder or ALATIVE SF3 dry accelerant）. Mix the ink with the ALATIVE SA5 (****5%, to total) activator completely and then is ready. Mesh count: *0T to **0T Drying: Air dry in ****8 hours, or forced dry at *0 OC in about *0 minutes. Cleaning: To remove the stain and bad print with ALATIVE SC6 remover, and to clear the screen plate with ALATIVE CC6 cleaner. 印前：用ALATIVE SC5清洗印件表面，确定无尘、无油脂；用***0%的ALATIVE SR8将产品稀释至需要稠度（调节油墨干燥速度，可以配合适量的ALATIVE RR6或ALATIVE SF3），添加****5%（对总量）ALATIVE SA5活化剂，与油墨充分混合；即可印刷。 网纱：*0T至**0T 干燥：自然风干，*2至*8小时；或*0OC烘干，约*0分钟。 清洗：用ALATIVE SC6清除污点和不良印刷；用ALATIVE CC6清洗网板。