Prix FOB
Obtenir le dernier prix|
1 Minimum Order
Pays:
China
N ° de modèle:
PSYF-LB-1200
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Mr. robinson
19 Linyin Road, Nanjing, Jiangsu
| Continuous Production Line of Rigid Polyfoam Sandwich panel with Aluminum Foil Facings |
|
          This
production line is a kind of specialized equipment for producing
laminated panels with the middle layer of anti-combustion
polyurethane or polyisocyanurate or phenolic polyfoam and with
embossed aluminum foil as the top and bottom face layers. The
laminated panel is between *0 and *0 mm in thickness, ***0mm in
width, length determined by the customer. The panel is mainly used
for making the ventilation duct for central air-conditioners.
Different insulating panels with other soft facing layers could
also be produced on the line. The operation principle of this line
is as follows: Raw materials of rigid-foam liquids are delivered
into the mixing head through the metering pump on the injection
machine and then injected onto the bottom facing sheet going to
conveyors along with the top superficial sheet. Between the upper
and lower conveyors, the liquid materials are hardened into shape,
after which the laminated panel is edge-trimmed and, by an
automatic tracking cutter, cut into segments according to the
preset length. Â |
| Main constituents |
| 1. Embossing machine unit  2. Reaction injection
machine  3. Foil decoiler  4. Double-belt
laminator 5. Hot-air circulator 6. Cross-cutter 7. Edge-trimming installation 8. Mobile injector  9. Pre-heating table 1. Embossing machine unit: For embossing foil from 0.*6 to 0.*2mm thick. Max.loading coil: ***0kg. 2. Reaction Injection machine: To meter and mix two different liquid components in a given mixing ratio required by technical process. A chiller and a temperature controller are equipped to meet the temperature requirements of foaming liquid chemicals. We have both high and low pressure machines for user's optional use. 3. Foil decoiler: Double-coil or single coil loader for client's choice with loading coil weight up to ***0kg. 4. Double-belt laminator: Options of laminator's length: *2m, *8m, *4m, *0m or *6m; speed range: 3 to 8m/min. Materials of laminator's conveyor plank can be either steel or aluminum as per client's choice. 5. Hot-air circulator: Used to heat up laminator's belt conveyors in an optimal design of air circulation route which can heat to *0℃ from *0℃ in one hour. There are both furnace and electricity heaters equipped on the line while the furnace can either use fuel oil or steam as heating energy depending on customer's choice. 6. Cross-cutter: With single or double pull broaches or disc-saw auto-tracking cutters for optional use. (Pls refer to the introduction on cutter series under matching equipment ). 7. Edge-trimming installation: There are both knife and disc-saw trimming installations for customer's choice. 8. Mobile injector: The user can choose either a hydraulic motor or servo motor with a crank as the driving system. 9. Pre-heating table: To heat to *0℃, temperature adjustable. |
|
Main technical parameters |
|
Specification of produced
panel                                    ***0
mm×*0～*0 mm (Width×Thickness), Length on request |
|
Picture of finished product |
| Â |
| Pays: | China |
| N ° de modèle: | PSYF-LB-1200 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
