The product is economical enough to be used for vibration isolation
and is easy to install due to its light weight
• A Leveling valve serves to maintain horizontality in step with
changes in load and make up for loss of pressure in the event of
decompression. Usually, its support at three positions is
desirable.
• An Oil Filter and Regulator attached to compressor may be used
without problems, but an Oil Filter and Regulator better be
installed for each Air Spring to cope with abrupt changes in
pressure and prevent an overload to the Leveling Valve.
• The Air Spring System configuration below shows a
Mount(Isolator) System designed for vibration damping. When for
Stroke(Actuator), a Leveling Valve is not necessary, but its use
under excessive pressure has to be prevented by using a pressure
regulator.
[How to Apply Air Spring]
Â
• Air spring system needs to be installed in an optimized
condition, considering its buckling (lateral deflection) since it
has low spring constant.
• Air spring has to be installed on a plane level with the
center of gravity of equipment.
• Even when air spring is installed on a plane level with the
center of gravity of equipment, air spring has to be installed
with intervals (width and length) that are greater than its
height to ensure its stability.
• When it is difficult to put the product on a plane level with
the center of gravity of equipment, air spring has to be
installed with intervals (width and length) twice as long as
the height of the center of gravity.
[How to Install Air Spring]
Â
The top and the bottom of air spring have each two nuts and a
fixed depth of 16㎜. These parts do not sustain great stress,
but as they must serve to keep the position of the installed
air spring, combining both the two taps with bolts should
guarantee its stability. One precaution here is that the
combining plate and air spring upper plate must be tightened
together. Otherwise, with the inlet nut sustaining concentrated
stress, upper plate may get deformed or blind nut incurs
cracks, thus causing air leaks.
Â
[Air Spring Part Names and Cross-Section Image]
Â
Â
[Product Uses]
Â
• Precision measuring equipment : electronic microscope, optical
microscope, 3D measurement device, illuminometer,
durometer
• Manufacturing equipment : LCD & Semiconductor Assembly
& FAB Equipment
• Inspection equipment : LCD, Semiconductor, PCB,
Film
• Precision processing equipment : Laser, Jig Boring Machine,
CNC Grinding Machine
• Auto parts testing equipment
• Belt tension equipment, Lifter, Packing press, Forming Press,
Belt tension(sludge spin-dryer), Paper machine press
Â
