❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Activization Plant for Activated Carbon Production

Prix FOB

Obtenir le dernier prix

1 Set Minimum Order

Pays:

China

N Â° de modÃ¨le:

Justfine-1001

Prix FOB:

(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

Commande minimale:

1 Set

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

Payment Type:

Groupe de produits :

Contacter maintenant

Shanghai Guanbaolin Activated Carbon Group Co., Ltd

China

Membre gratuit

Personne Ã contacter Jenny

Shanghai, Shanghai

Contacter maintenant

SpÃ©cification du produit

Ã¸2 6x22m:1~10 million
Ã¸2.4x22m:1~10 million
Ã¸2.2x22m:1~10 million
Ã¸1.9x15m:1~10 million

La description

Coconut husk, apricot kernel shell, walnut shell, hawthorn kernel
shell, peach kernel shell, coal, palm kernel shell and charcoal are
common raw materials of activated charcoal products available on the
market. Regional resource superiority is dominant in material selection.
The plant is integrated with an automatic control system. Main structure
of the activation furnace consists of a material bin, an elevator, a feeder,
a furnace stack, refractories, a rotator, a temperature detector, an
activator, a cooler, a settling chamber, a boiler, a fan, a deduster, and an
automatic PLC system.

Raw materials are carbonized and screened to eliminate particles
under 2mm. Moisture content shall be controlled at a level below *5%.
Then, materials are filled into the elevator bin, and conveyed to the feeder
on top. From the feeder bin, materials are fed into the furnace evenly by a
variable-frequency feeder, and heated by an ignitor. Temperature inside
the furnace shall be above **0°C before feeding. A calculated amount
of oxygen and vapor is delivered into the furnace through the fan for
activation. 4 tons of vapor are required for one ton of finished activated
carbon products, and penetrating vapor shall be used instead of spreading
vapor for restraining ignition loss and improving efficiency. Materials are
conveyed into the pre-heating section following rotating movement of
the furnace, and then into the activation section after their temperature
reaches **0°C. Temperature of the material will climb dramatically to
*******0°C after contact with vapor. Duration of the contact between
material and vapor is known as Activation Time, which is variable within
the range of ****0 minutes, given the specific temperature and oxygen
amount. To meet the duration required, materials in the furnace shall
be moved forward at a rate of 6m/h. Temperature of materials shall be
******0°C in the discharge tube of cooling section, and around **0°C as
they leave the tube for a water-cooling device separated with the furnace,
where the activated materials shall be cooled to a room temperature
between ****0°C after approximately 3 minutes of anaerobic cooling
before they slide into prepared jumbo bags (0.5 ton of capacity each)
out of gravity, or convey to the next bin for grinding via the pneumatic

conveyor. Filled jumbo bags may be moved by manual forklifts. The
settling chamber in the end of the furnace is designed for 4 purposes,
which are preheating the waste heat boiler, dust settling, keeping vapor
infusion to avoid frozen pipelines in cold regions, and combusting
incomplete combusted fume to reduce black smoke and efficiently use
energy generated by fume combustion. The waste heat boiler connected
to the settling chamber is designed for generating vapor for activating
material by high-temperature (around **0°C) end gas. The induced draft
fan connected to the boiler is designed for pumping the high-temperature
end gas into the waste heat boiler, and then into the pouch- style pulse
dust collector for subsequent end-gas treatment, such as sprinkling, to
meet emission standard. Output of the plant varies with specific material
type and quality requirements. Desulfurization and denitrification devices
are required for coal carbon production. See the table below for outputs.

The entire process is controlled by a PLC system which offers
much lower labor intensity, controllable quality, safety, much less manual
work, comparing to traditional operation mode. Moreover, the plant is
capable of prolonged continuous operation without blowing out, thanks
for a maintenance ratio significantly lower than that of products of other
manufacturers'.

Pays:	China
N Â° de modÃ¨le:	Justfine-1001
Prix FOB:	(Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	-
Commande minimale:	1 Set
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	-
Payment Type:	-
Groupe de produits :	-