La description
8MW HFO power plant(*2PC**6B-V**0)
Main technical specifications
(1)Model: *2PC**6B-V**0
(2)Type:Â V type,*-stroke,MPC Turbocharged, Inter-cooling,
Irreversible, Pump（built-on）(lubricating oil pump, Low and
high temperature water pump, Fuel oil transfer pump),
Turbocharger, Air cooler fixed in the free-end, Wet oil Sump,
Governor on the upper right(looking from the output side).
(3) Cylinder diameter: **0mm Â
(4) Piston stroke :Â **0mm
(5) cylinder number: *2
(6) cylinder layout： V-type, V-type *5°inclined angle, **0mm
center distance of the cylinders in the same row,**5mm
eccentricity between row A and B.
(7) Geometry compression ratio:Â Â *2.5/1
(8)Firing order:Â Clockwise(looking from the output side)
             Â
Row A: 1—3—5—6—4—2—1
             Â
Row B: *5°insert or **5°insert depending on the result of
torsional vibration.
(9)Standard ambient condition for diesel engine rated power
Turbocharger suction air temperature : *5℃
Atmospheric pressure Po: **0Kpa
Air cooler inlet sea water temperature: *5℃
Exhaust back pressure: ≤2.5Kpa
Air vacuum degree: ≤2.5Kpa
Fuel oil low calorific value: ****0kj/Kg
When there is a big difference between the ambient condition and
the above-mentioned standard ambient condition, Please see Annex
II for the output derating data of the engine.
 (*0) Power
After the output flanges of diesel engine under Standard ambient
condition:
Maximum continuous rating(MCR)：***0KW
Continuous serving rating(CSR)：***0KW
Overload output (**0%)：***0KW(Every *2 hours allows the use of
1 hour)
Note: Please see the Annex I for the curves of the operation area
allowed by the main engine.
(*1) Rotate speed
     Rated speed : **0r/min
     Minimum steady speed (Idle speed
with zero load): **0r/min
      Firing speed: *0r/min
(*2) Crankshaft rotation direction (The vision faces to output
side): Clockwise
(*3)The maximum continuous rating (MCR) performance parameter
under standard ambient condition:
   Mean effective pressure: ***7Kpa
   Piston mean speed: *0m/s
The average exhaust temperature after exhaust
valves：**0±*0℃，
the Maximum temperature difference between any cylinder and the
average value should be≤±*0℃ .
Turbine inlet exhaust gas temperature : ≤**0℃
Inlet manifold internal supercharge air pressure : **0Kpa ,±*0%
allowed
Inlet manifold internal supercharge air temperature : *5℃
   Maximum explosion pressure(average value):
*7±0.2Mpa
                                Â
(±0.5Mpa maximum deviation between the single cylinder and
average value )Â
Main bearing temperature: ＜*0℃
Fuel consumption A**4: **2g/kwh, *5% tolerance, new engine add 3
g/kwh(low heating value is ****0Kj/Kg when light diesel oil is
used)
Fuel consumption converted to **2g/kwh×（****0/Heavy fuel oil
low heating value） when using ********0 seconds fuel
oil(Redwood No.1,**0°F).
Lube oil comsumption: 1.*9g/kwh
| Pays: |
China |
| N ° de modèle: |
8MW
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
CHINA |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
- |
| Heure de livraison: |
75 DAYS |
| Capacité de Fournir: |
- |
| Payment Type: |
T/T, L/C |
| Groupe de produits : |
HFO power plant
|
