Prix FOB
Obtenir le dernier prix1.9 ~ 4.6 / Set ( Negotiable )
|100 Set Minimum Order
Pays:
China
N ° de modèle:
Epoxy Sealer No.1
Prix FOB:
1.9 ~ 4.6 / Set ( Negotiable ) Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
1.9 per Set
Commande minimale:
100 Set
Packaging Detail:
1. 400ml/set, 20sets/Carton 2. Quantity of 20ft container: 1242cartons
Heure de livraison:
About 35 days for first cooperation
Capacité de Fournir:
2500 Ton per Day
Payment Type:
T/T, L/C, D/P
Groupe de produits :
Personne à contacter Ms. Evergain
No 529, 7th Petrochemical Road, Gaolan Port Economic Zone, Guangzhou, Guangdong
1. Anti-mildew, waterproof, non-yellowing,
2. Suitable for complicated colorful
pattern
3. Good acid and alkali resistance, stain
resistance
4. High compressive strength, good abrasion
resistance
5. Green environmental protection, no volatile
odor
6. Easy to maintain, cleanable to the original
color.
1. All kinds of cabinets
aperture, window, furniture, etc
2. All kinds of edges of Kitchen, toilet, also can be
used to paste all kinds of hard materials
3. Bathtub, shower room, glass partition, implement,
lavabo, mesa and basins of guesthouse
4. Hotel, family, such as the installation of
sanitary ware, waterproof, plugging and decoration
processing.
1.
Preparation
Tile decoration grout, injection dispenser, texture
paper, knife, gap cleaning awl, edge pressing ball,
water scraper, materials scraper, etc.
2.
Processing
(1)
Cleaning the tile gap and stick the texture
paper
Keep about 3mm groove and 2mm width pf the tile gap,
with the paper on both sides, must keep the crossing
area clean, stick the texture paper close to the
gap;
(2) Put
the cartridge into the dispenser
Press the to pull the rod out and open the
cartridge to keep the opening upside, screw the mixer
to the opening, then put the cartridge into the
dispenser. The opening of the mixer can be adjusted by
cutting to fit the gap sizes. (smaller than the
gap.)
(3) Start
to process
At the beginning, need to remove the first mixed grout,
about *0cm, for a new hand, suggest to inject ****0cm
for practice, then increase the length accordingly.
Smoothen the grout by using water scraper, edge
pressing ball and even finger. If still any grout
remain inside the dispenser, lay it flat-wise. Need a
materials scraper to hold under the opening of the
mixer. If find any uneven place, keep injection. After
all gaps of the paper smoothened, remove the paper and
keep in stand for *4 hours.
Rich and bright color can meet all decoration needs.
| Pays: | China |
| N ° de modèle: | Epoxy Sealer No.1 |
| Prix FOB: | 1.9 ~ 4.6 / Set ( Negotiable ) Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 1.9 per Set |
| Commande minimale: | 100 Set |
| Packaging Detail: | 1. 400ml/set, 20sets/Carton 2. Quantity of 20ft container: 1242cartons |
| Heure de livraison: | About 35 days for first cooperation |
| Capacité de Fournir: | 2500 Ton per Day |
| Payment Type: | T/T, L/C, D/P |
| Groupe de produits : | Ceramic Tile Sealer |
