La description
|
SpecificationÂ
|
Â
|
|
IterfaceÂ
|
SD or USB LinkÂ
|
|
Max Printing Object SizeÂ
|
**0***0***8mmÂ
|
|
CirtuitÂ
|
4th generation,max support 5 motorÂ
|
|
X,Y Axis Positioning ResolutionÂ
|
0.*2mmÂ
|
|
X,Y axis max speedÂ
|
***0mm/minuteÂ
|
|
Z axis positioning resolutionÂ
|
0.**5mmÂ
|
|
Z axis max speedÂ
|
***0mm/minuteÂ
|
|
DimensionÂ
|
|
Product dimensionÂ
|
**0***0***0mmÂ
|
|
Packing dimensionÂ
|
**0***0***0mmÂ
|
|
Material SupportÂ
|
ABS and PLAÂ
|
|
Material SizeÂ
|
1.*5mm wireÂ
|
|
Material size requirementÂ
|
1.*5**0.1mmÂ
|
|
Temperature SensorÂ
|
thermocouple temperature sensorsÂ
|
|
Printing Object SpecificationÂ
|
Â
|
|
Position resolutionÂ
|
0.1mmÂ
|
|
LayerÂ
|
0.3mmÂ
|
|
Vertical Printing SpeedÂ
|
*5Cubic Centi-Meter/ HourÂ
|
|
Object SizeÂ
|
**0***0***6mmÂ
|
|
LCD displayerÂ
|
OptionalÂ
|
|
FilamentÂ
|
|
Material TypeÂ
|
ABS, PLAÂ
|
|
ColorÂ
|
White, Black, Red, Green, Yellow, Blue, Purple,
 Silver, Gold, Orange, Self colorÂ
|
|
Filament sizeÂ
|
1.7mmÂ
|
|
1 Roll Filament weightÂ
|
1.5kgÂ
|
|
Components SpecificationÂ
|
Â
|
|
MK7 + ExtrudorÂ
|
1 pcÂ
|
|
Max temperatureÂ
|
**0°C(**0°F)Â
|
|
Printer DimensionÂ
|
*0**0**0cmÂ
|
|
Printer WeightÂ
|
8KGÂ
|
|
Electric Power SupplyÂ
|
**0VÂ
|
|
OutputÂ
|
**0WÂ
|
|
Software FormatÂ
|
STL, G code
|
|
Operation SystemÂ
|
Windows 7, Vista, Linux, Macox, XP,Â
|
|
ComplianceÂ
|
CE, CSAÂ
|
|
SoftwearÂ
|
Replicator G( Both English and Chinese Edition
|
The WANHAO LCD Interface board is a DIY addition to your
DUPLICATOR ONE that will allow you to interact directly with the
machine. It has multiple s, multiple LEDs, and a *6×4
character LCD screen to provide feedback directly to you. Using
this board, it is possible to run your WANHAO completely
independently with no computer attached. You can set and read the
temperature, view the progress of a build, and even start a new
build from a file stored on the SD card. Of course you can also
hack the firmware to make it anything else you might want as
well.
This kit is DIY, and soldering is required. All the components
are through-hole, so it is a great kit for beginners.
Â
The Duplicator Two is our first dedicated 1.*5 mm filament
extruder. This extruder was designed from scratch, and contains a
number of custom manufactured parts. Weve learned a lot over our
past extruder designs, and incorporated a lot of those lessons
here: thats why its smaller, lighter, and faster to build. And
since its designed from the ground up for 1.*5 mm filament, its
light-years ahead of past designs in small-filament reliability.
Â
The layer alignment is much better which results in nicer prints
and higher resolution.
Weve completely overhauled the drive system to give the optimum
positioning accuracy. The entire system has been upgraded to
sturdy 3/8″ diameter linear shafting. This is probably overkill,
but you can trust that the axes will be sturdy. Weve also
switched to self-aligning, sintered brass bearings. These are
very forgiving to DIY assembly and provide a nice, smooth motion
on the steel shafts. Weve completely replaced the Z axis with a
stepper driven, cantilevered stage. Guided by two of the linear
shafts, this completely eliminates any Z wobble and results in
nicely aligned layers. Using a high-angle lead screw, we were
able to increase the speed of the Z axis from **0mm/minute to
1,**0mm/minute. This means the layer changes are almost
completely imperceptible.
Â
Connect over USB and hit print — the machine will calibrate
itself and start printing.
The new electronics have been designed to make the printing
experience easier than ever. The DUPLICATOR TWO connects to your
computer via a standard USB cable thanks to a USB chip on the
motherboard. Weve also added full endstop support so that you
never need to touch the XYZ axes ever again. When you hit print,
the machine will automatically home itself, heat up, and begin
printing. All you have to do is sit back and relax while your
DUPLICATOR TWO does all the work. Living in the future is
awesome. Oh yeah, and the elec
| Pays: |
China |
| N ° de modèle: |
Duplicator 1
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
- |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
- |
| Groupe de produits : |
- |
