Prix FOB
Obtenir le dernier prix90 ~ 110 / ( Negotiable )
|1 Minimum Order
Pays:
China
N ° de modèle:
D60-3V
Prix FOB:
90 ~ 110 / ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
90
Commande minimale:
1
Packaging Detail:
Carton
Heure de livraison:
3 work days
Capacité de Fournir:
300 per Week
Payment Type:
T/T
Groupe de produits :
Personne àcontacter swallow
Chengdu, Sichuan
The technical parameter of DRO-D*0
 1) Voltage range: AC *0V***0V/*0HZ**0HZ
 2) Power dissipation: *0VA
 3) Coordinate number: 1/2/3
 4) Display: 7 bit display with signed
 5) Times frequency: 4X
 6) Readout box signal: TTL,EIA****-A
 7) Input frequency:>**0KHZ
 8) Resolution:*0um, 5um, 1um, 0.5um, 0.1um
 9) Operating keyboard: light touch s
*0) Linear scale Grating space: 0.*4mm, 0.*2mm, 0.*1mm, power supply is *5V.the difference between two and four TTL output signal is *0°.
Â
 D*0 Function introduction
  1) Circular drilling function: Digital readout can automatically calculate the location of the hole according to the ted data
 2 ) Linear drilling function: Opposite to the axis of any angle, only the hole spacing remain fixed value, The DRO can calculate the location of the hole according to the ted data
 3) Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is ted, the DRO value will be saved.
 4) Determine the workpiece center: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece center
 5) **0 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator
 6) Round arc processing: Sample round processing and two axis arc processing
 7) Function calculator: Calculator function can improve operation efficiently
 8) Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece.
 9) Z-axis combination calculation: Z-axis can display the combination displacement of two parallel axis
*0) Preset value: Preset the radius of workpiece
*1) Linear scale error compensation or non-linear scale error compensation:Compensation to ensure absolute precision and maxmium efficiency.Multi-point compensation can reduce the machine error.
*2) Numerical filtering function
*3) EDM depth control: Can assist tool make depth control efficiently
| Pays: | China |
| N ° de modèle: | D60-3V |
| Prix FOB: | 90 ~ 110 / ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 90 |
| Commande minimale: | 1 |
| Packaging Detail: | Carton |
| Heure de livraison: | 3 work days |
| Capacité de Fournir: | 300 per Week |
| Payment Type: | T/T |
| Groupe de produits : | 3 axis digital readout |
