Prix FOB
Obtenir le dernier prix0.01 USD / Piece
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
29468
Prix FOB:
0.01 USD / Piece Obtenir le dernier prix
Localité:
Jiangsu, China
Prix de commande minimale:
0.01 per Piece
Commande minimale:
1 Piece
Packaging Detail:
Single box+carton+pallet or Customer requirement
Heure de livraison:
3-30 days
Capacité de Fournir:
200000 Piece per Month
Payment Type:
T/T, L/C, D/P, Western Union
Groupe de produits :
Personne àcontacter Ms. Lisa
Hongxinglu, Liaocheng, Shandong
 ****8 Thrust roller bearing
Spherical Roller Thrust Bearings are separable single direction
acting axial bearings (see sketch below).
NKE Spherical Thrust bearings are manufactured to the standard
boundary dimensions DIN **8 General.
Spherical roller thrust bearings are self-aligning as their
spherical rollers run on the sphered raceways of shaft and housing
washers. Therefore they are well able to accommodate errors of
misalignment and some shaft bending in an optimum way.
Spherical roller thrust bearings transmit forces via a contact
angle towards the centre axis. Thus, they are able to accommodate
some radial forces along with high axial loads.
But, it must be considered that the acting radial forces must not
exceed approximately *5 % of the applied axial forces. NKE
spherical roller thrust bearings are produced to normal tolerance
class (PN) as standard.
Detailed tolerance values available on request
Misallignment
Spherical Roller
Thrust Bearings are optimum to compensate for misalignments.
The permissible amount of misalignment from the centre position
however, is dependant on both the bearing series and the applied
loading. Under normal operating conditions, such as a rotating
shaft washer and permanent misalignment the, following values may
be assumed: Cages
Small and medium size NKE spherical roller
thrust bearings are available with either solid brass cages (suffix
M) or pressed steel cages (suffix J).
Large spherical roller thrust bearings are produced with solid
brass cages (suffix M) as standard. Spherical
Roller Thrust Bearings are separable single direction acting axial
bearings (see sketch below).
NKE Spherical Thrust bearings are manufactured to the standard
boundary dimensions DIN **8 General.
Spherical roller thrust bearings are self-aligning as their
spherical rollers run on the sphered raceways of shaft and housing
washers. Therefore they are well able to accommodate errors of
misalignment and some shaft bending in an optimum way.
Spherical roller thrust bearings transmit forces via a contact
angle towards the centre axis. Thus, they are able to accommodate
some radial forces along with high axial loads.
But, it must be considered that the acting radial forces must not
exceed approximately *5 % of the applied axial
forces.NKE
spherical roller thrust bearings are produced to normal tolerance
class (PN) as standard.
Detailed tolerance values available on
request
Misallignment
Spherical
Roller Thrust Bearings are optimum to compensate for
misalignments.
The permissible amount of misalignment from the centre position
however, is dependant on both the bearing series and the applied
loading.
Under normal operating conditions, such as a rotating shaft washer
and permanent misalignment the, following values may be
assumed:
Cages
Small
and medium size NKE spherical roller thrust bearings are available
with either solid brass cages (suffix M) or pressed steel cages
(suffix J).
Large spherical roller thrust bearings are produced with solid
brass cages (suffix M) as standard.
| Pays: | China |
| N ° de modèle: | 29468 |
| Prix FOB: | 0.01 / Piece Obtenir le dernier prix |
| Localité: | Jiangsu, China |
| Prix de commande minimale: | 0.01 per Piece |
| Commande minimale: | 1 Piece |
| Packaging Detail: | Single box+carton+pallet or Customer requirement |
| Heure de livraison: | 3-30 days |
| Capacité de Fournir: | 200000 Piece per Month |
| Payment Type: | T/T, L/C, D/P, Western Union |
| Groupe de produits : | thrust roller bearing |
