❯

BOOK A CALL

Book Call On Your Favorite Time

I'm a Buyer I'm a Supplier

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

180 Coal Rod Machine

Prix FOB

Obtenir le dernier prix

4500 ~ 12000 / Set

1 Set Minimum Order

Pays:

China

N Â° de modÃ¨le:

Prix FOB:

4500 ~ 12000 / Set (Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

4500 per Set

Commande minimale:

1 Set

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

Payment Type:

L/C, T/T

Groupe de produits :

Contacter maintenant

Gongyi Fu Yu Machinery Co., Ltd

China

Membre gratuit

Personne Ã contacter Han

Zhengzhou, Henan

Contacter maintenant

La description

**0 Coal Rod Machine

Working principle:

Coal rod machine is a machine tool for the different shape of the powder coal. Its working principle is: the motor through the triangle belt transmission to the transmission, the transmission output shaft through the floating coupling to push the propulsion shaft, the propulsion shaft to promote the coal feed through the forming die, and then give birth to an ideal high pressure coal rod.

Structure features:
1. The feed screw leads to large, feed into the material quickly, and promote the small, the province power.
2. Shaft block with the use of rigid connection, high degree of resistance, anti - thrust, machine stability
3. The need to seal the use of fault structure, the dirt from the fault
4. Triangle belt drive, smooth operation, low noise, and its overload protection
5. The head and cylinder are connected with the card ring structure and the structure of the bolt.

Installation and commissioning:

1. The installation of spare parts must be thoroughly cleaned, removal of the transport or storage of a long time of rust, and check the parts are not damaged.

2. Based on the diagram on the basis of concrete pouring, and concrete screw, after the solidification of the coal rod machine dipping in concrete based on screw alignment, two concrete grouting, anchor bolts to be solidified, correct the machine level, the machine can be stable test machine.

3. Before the test machine will be the lubrication of lubrication, oil content is moderate. Check all the bolts if there is a loose phenomenon, and tighten. Point to move the machine to see if there is a foreign body or abnormal sound. All confirmed that no party can start running. And check the power direction is correct.

4. The machine idle for 3~5 minutes, then all the normal feeding trial, new machine feeding should be uniform, moderate (wet and dry water generally contain *2%~*5%).

Use and maintenance:
1. Every shift before the boot of the rotation is flexible; there is no abnormal sound, empty machine running **3 minutes to feed production.
2. Raw materials must be processed , the maximum particle size of less than 3mm, adding water, adding binder, curing agent, can be used by mixing retting after *4 hours.
3. Feed the blockage, using wood or bamboo dredge, avoid the use of metal bar.
4. The machine rotating part of the bearing should be the temperature is not more than *0 degrees.
5. Stop before stopping the material, the cylinder body material to squeeze the air down, and the demolition of the machine head, after washing, to prepare for work.
6. In order to make the meter not exceed the load operation, the user to install the current voltage meter, according to the current meter to adjust the amount of material and water content.

Pays:	China
N Â° de modÃ¨le:	-
Prix FOB:	4500 ~ 12000 / Set (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	4500 per Set
Commande minimale:	1 Set
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	-
Payment Type:	L/C, T/T
Groupe de produits :	-