16E1 Coax to RJ45 Front Mount Impedance Matching Balun Panel

Description:

The *6 E1 Coax to RJ*5Front Mount Impedance Matching Balun Panelprovides *5ohm coax (BNC connector) to **0ohm twisted pair (RJ*5 connector) conversion. The *6ports balun panel matches *6sets of dual *5ohm (female BNC connector) to **0ohm (RJ*5 connector) converter. This feature allows network & datacom equipment manufacturers who are selling equipment for use in Cos with only **0ohm telco interface to offer their equipment to G.**3 countries using *5ohm connections.

The *6E1 G.**3 impedance matching balun panel solve the mismatch between UTP and coaxial cable. The balun can be used for internal network connectivity T1/E1/CPE network transmission equipment and other applications.

The balun matches not only signal impedance, but also the pulse shapes of the signals according ITU-T G.**3 standard. The *6port balun panel mounts in a standard *9 inch(*8.3cm) rack, occupies only 2U of rack. The coax (BNC) and RJ*5 connectors are on the front.

The **0ohm port also can be DB*8 connector in the back panel. So the balun panel can be used as *5ohm BNC to **0ohm RJ*5 conector or to **0ohm DB*8 connector.

 

real panel with **0ohm DB*8 connector

Features:

Data Rates to 2.**8 Mbps

*5 Ohm (M4 connector) to **0 Ohm Twisted Pair （RJ*5）or **0ohm DB*8 connector;

Bi-Directional Signal Conversion

2U high enclosed chasiss

mounts in a standard *9 inch(*8.3cm) rack

No AC Power or Batteries Needed

*6 Female BNC connector Available

BNC connector and RJ*5 connector are front.
 

 

G.**3 Interface

BNC connector *5OHM

RJ*5 DB*8 connector **0OHM

RJ*5 connector **0OHM as 1 2 TX,4 5 RX
 

Dimension

**3mm(L)
*8mm(W)

*8mm(H)