Prix FOB
Obtenir le dernier prix( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
150KVA Auto Vertical-type Multi-point Spot Welder
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
wooden case with iron frame
Heure de livraison:
90 working days
Capacité de Fournir:
10 Set per Month
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
-
Personne àcontacter Mr. Tom
No.2,Shaxing Road,Lanhe Shajiao Street,Panyu District, Guangzhou, Guangdong
Machine Max Speed:Â ****0Wires/Min
Welding One Cross Wire Time: 0.**0.8seconds(Depends on wire
diameter, excluding labor and other external factors.)
1.3Wire Material Requirements:
Mild steel wire;
Low carbon steel wire;
High carbon steel wire;
Stainless steel(S.S.) wire;
Straight;
1.4Machine Data:
Transformers Quantity:Â Â 4Sets
Transformers Capacity:Â Â **0KVA
Secondary Current:Â Â Â Â Â *2KA
Secondary Voltage      5~9V
Cylinders Quantity:Â Â Â Â Â
*6Sets(Single)
Pressure Power:Â Â Â Â Â Â Â Â
**0KG
Electrodes Width:Â Â Â Â Â Â Â
*0mm
Each Electrode is able to weld **2 welding intersections
1.5Required Supply System to run the machine:
Power supply(*-phase):Â Â Â Â **0V/*0HZ**0%
Customer's Transformers
Capacity:Â Â Â Â Â Â Â Â
**0mm2
Molded Case Circuit Breaker:Â Â **0A
Squeezed
Air:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
5~8kg/cm2
Air
Consumption:Â Â Â Â Â Â Â Â Â Â Â
**0L/min
Cooling Water Volume:Â Â Â Â Â Â
**0L/min
2.Machine Description
2.1Frame Feeding System:
Loaded in 1~4pieces of steel frame to be welded manually in the
central of welding machine.
2.2Cross Wire Feeding System:
Automatic cross wire loading carriage with single wire hopper for
sorting ,positioning and ejecting straightened,cut to length cross
wires.
2.3Steel Shelf Mesh Welding System:
According to the wire welding pitch,the machine can adjust
cylinders,electrodes,and gripping pliers.Adjustable of each point
welding time and welding current for the most proper electrode
stroke and perfect use of electrode dies.
2.4Output Device System:
By means of servo motor control,cross wires fed up and welded line
after line until one cycle finished.Then,servo motor returns to
initial point .Unloaded welded wire frame manually.
2.5Controlling System:
By means of P.L.C. along with touch-off screen,all the parameters
of system,and figures could be set on the screen.Besides,all
abnormal signals also will show from the screen.Cross wire feeding
controlled by DC servo motor;welding machine is controlled by
Thyristor and micro-computer controller.connecting with P.L.C,The
action process and wrong messages of the machine will be shown
graphically.
2.6Fault Examination System:
The machine will stop automatically when there is following faults:
Wires re-supply,non-wires,fault of line wires discharging,fault of
cross wires ejecting,line wire forwarding,short of welding
power,overloaded of servo motor,fault fixing ,squeezed air abnormal
,over-high temperature.
| Pays: | China |
| N ° de modèle: | 150KVA Auto Vertical-type Multi-point Spot Welder |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | wooden case with iron frame |
| Heure de livraison: | 90 working days |
| Capacité de Fournir: | 10 Set per Month |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | - |
