Prix FOB
Obtenir le dernier prix6 ~ 10 USD / ( Negotiable )
|200 Set Minimum Order
Pays:
China
N ° de modèle:
EW-AT001
Prix FOB:
6 ~ 10 USD / ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
6
Commande minimale:
200 Set
Packaging Detail:
blow case+logo labe+carton
Heure de livraison:
within15-45days
Capacité de Fournir:
200000 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
-
China
Personne àcontacter Mr. luca
zhong shang, shanghai
*2pcs disc brake caliper kit
(EW-AT**1)Â
_This tool is used to wind back brake caliper pistons when
servicing brack caliper or replacing brake
padsÂ
_Good quality ,including left and right hand threaded
rewind tools allow the easy return of the brake piston into
the caliper to provide clearance for new brake
padsÂ
_Application for most cars .such as audi ,Fod
,BMW,tYOTA,Nissan,VW ,GM etcÂ
Detailed specification :Â
1 right or left spindler threadÂ
1 reaction plateÂ
*0 Â brake piston adaptersÂ
Material:#*5steel or *0cr  if you need heat treatment
is ok .Â
Packing:color logo label +film + carton
packingÂ
Meas:*6x*4x*7cm/*0sets *9kgÂ
Â
| ITEM NO. Â Â | Â EW-AT**1 |
| CONTECTS Â | Â 1 RIGHT HAND THREADED REWIND TOOLS Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 1 RELATION PLATE Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â *0 BRAKE PISTON ADAPTERS |
| Â PACKAGE |
  MEAS:*6X*4X*7CM,*9/*8KGS  |
1.Remove the brake caliper from the wheel knuckle that it's
mounted to. Be sure to support it on something or with a wire
hanger so that the brake hose doesn't get
damaged.
2.Remove the outer brake pad but leave the one on the piston
side attached.
3.Retract the screw on your disc brake piston tool and slide
its plate into place where the outer pad used to be, lining
the retracted screw up with where the piston is behind the
other pad.
4.Use the attached handle to screw the screw part of the tool
towards the pad. As you do this, you will see the piston-side
pad begin to retract.
5.Do this until the pad is flush with the caliper, ensuring
the piston is fully retracted.
6.Remove your disc brake piston tool and the piston-side
pad.
7.Once the caliper has been retracted back into its bore, you
can move on to installing your new brake pads and rotors,
which will now easily slide over each other. Be sure to press
the brake pedal a few times before moving the car, to re-seat
the pads against the rotors.
| Pays: | China |
| N ° de modèle: | EW-AT001 |
| Prix FOB: | 6 ~ 10 / ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 6 |
| Commande minimale: | 200 Set |
| Packaging Detail: | blow case+logo labe+carton |
| Heure de livraison: | within15-45days |
| Capacité de Fournir: | 200000 Set per Month |
| Payment Type: | T/T, L/C |
| Groupe de produits : | - |
