Prix FOB
Obtenir le dernier prix60 ~ 80 USD / Set ( Negotiable )
|3 Set Minimum Order
Pays:
China
N ° de modèle:
TY-1000MW
Prix FOB:
60 ~ 80 USD / Set ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
60 per Set
Commande minimale:
3 Set
Packaging Detail:
1set/box
Heure de livraison:
1-2 days for sample, 3-5 days for large order
Capacité de Fournir:
2000 Set per Month
Payment Type:
T/T, Western Union, PayPal
Groupe de produits :
Personne àcontacter Ms. Eva
Qing hu Gui gu dong li Industrial Estate ,, Shenzhen, Guangdong
Specification:
Â
| Transmission power:***0MW |
| Working frequency:*******0 Mhz |
| Working voltage:DC *2VÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â |
| Working current:**0mA |
| Frequency channel: *5CH |
| Transmission distance:*******0M (No block) |
| Transmitter size:*8**2**9MM |
| Receiver size:**6**0**1MM |
Â
Â
Instruction:
Â
>Should install it at the place where children cannot touch.
>Do not expose it at the damp place for preventing it from water or protecting people from electric shock.
>Please turn off the power when not using...
>Please use the power adapter produced by our company. Please use good quality power adapter. Shoddy power adapter may lead bad effect or damage. (***0mW transmitter with *2V***0mA switching power supply; *8 channel receiver with *2V**0mA regulated power supply).
>Our company will not be responsible for any damage incurred by your amending or dismounting without a permit.
>You should install antenna before turn on the power, do not touch the antenna when the power on, otherwise you may be burnt! Please turn off the power before unplug the antenna after use. Please unplug the power adapter when you don't use.
Â
Parameters:
Â
|
Parameter |
Fittings: |
|
Volume: *8**2**9MM(TX) **5**0**1mm(RX) |
Receiver: 1 pcs |
|
Voltage/Current:*2V ***0mA |
Transmitter: 1 pcs |
|
Frequency: 0.9G *1.*8G |
Power adapter: 2 pcs |
|
Power: **0mW, *5DB |
Antenna: 2 pcs |
|
Video output: 1Np- p |
AV cable: 2 pcs |
|
Work temperature: –*0 °c + *0°c |
Manual:1 pcs |
Â
Â
Channel and frequency:
Â
|
TX CH |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
A |
b |
c |
d |
E |
F |
|
RX CH |
*1 |
*2 |
*3 |
*4 |
*5 |
*6 |
*7 |
*8 |
*9 |
*0 |
*1 |
*2 |
*3 |
 |
 |
|
Frequency |
**3 |
***1 |
***1 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
***0 |
Â
Installation steps: ***0 mW transmitter below, have a dedicated connection lines, of which two black head for the power and output, is *2V regulated power supply, output for camera's power supply. The white and yellow jack are connect to the audio and video of the camera. The other end of 3.5 headphone,which jack into the transmitter.
Â
1.You can press the black CONTROL on LED screen of digital transmitter to choose channel, LED screen have *5 channel : 1CH, 2 3 4 5  6 7  8  9 A b  c  d  E  F CH.
2.You can press the black CONTROL on LED screen of digital Receiver to choose channel , digital Receiver have *8 channel : *1CH, *2,  *8CH...
3.When using, if the transmitter channel matching receiver channel, then you will receive the audio and video. Refer to above table. Receiver indicate VIDEO. AUDO.*2V, respective connect with monitor AV in. DC*2V is regulated power supply.
4. Don't need adjust transmitter channel, just adjust receiver Channel it's OK ..
Â
Digital Screen Recevier operation instructions :
1) Plug the adaptor into the power of the digital receiver, LED screen will be illume. Press CONTROL can receive *8 channels between 0.9G*1.*6G. Display "*1", "*2", "*3" ... "*8". change one channel at one time, When you need several channels auto cycle, press CONTROL when the storage light illume, it means you have storage this channel.then undo . Repeat it until you finish choose channel.
Â
2) Press CONTROL to "OA" channel, the receive will auto cycle receive different channels. If you want to cancel cycle 1 Press CONTROL until display "*0", then cancel cycle 2, turn off power, just showing storage light showing when adjust on "OA". It means without cycle. If out of power when the receiver is cycling, then you need to setup cycle again. If you turn off power when the receiver is not cycling, then you don't need to setup again. Receiver will be memory the former channel.
Â
Warranty:If there's any quality problem in one week after buyer receive products, buyer can return products to seller for replacement; if the products is broken in one year, buyer can send back for repair.
Â
Replacement conditions: Exterior intact, the product seals intact, accessories non-missing.
Â
Maintenance matters: appearance of the product damage, high-voltage burn, moisture, seals broken, flooding...are not a warranty.
Â
Remark:Buyer should afford shipping cost, Bank charges, and other cost. Prohibit use the product to do anything illegal.
| Pays: | China |
| N ° de modèle: | TY-1000MW |
| Prix FOB: | 60 ~ 80 / Set ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 60 per Set |
| Commande minimale: | 3 Set |
| Packaging Detail: | 1set/box |
| Heure de livraison: | 1-2 days for sample, 3-5 days for large order |
| Capacité de Fournir: | 2000 Set per Month |
| Payment Type: | T/T, Western Union, PayPal |
| Groupe de produits : | Analog Wireless Video Transmitter |
