or
Contact Us
BOOK A CALL
Book Call On Your Favorite Time
Code
🗘

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Pipe Production Line

  • Taiwan Taiwan  
  • Last Updated:
    Posted on: 08 Dec 2024

RFQ Details

1. oil well/off shore of crude oil additives: 1.1) paraffin control aid: to improve the crude oil transport-speed in the pipe and decrease the cost for transport. 1.2) hydrogen sulfide scavenger: to remove the toxic gas of the h2s in the pipes, tanks, and containers and make sure the operator's safety. 1.3) scale inhibitor: to inhibit scale fouls the line, heat exchanger... etc. transport equipment. 1.4) demulsifier: emulsion break of the crude mixed with water in oil field to rise up the crude quality and be easier treated in refinery. 1.5) corrosion inhibitor: to inhibit pipeline, heat exchanger... etc. transport/drill well equipment corrosion occurred to rise up the economic profit. 2. refinery/petrochemical plant process additive: 2.1) neutralizer: neutral acid, inhibit the acid corrosion accrued in the pipeline and relative equipment. 2.2) antifoulant: inhibit the organic/inorganic foul accrued in the pipeline and heat exchanger, etc. equipment. 2.3) antiscale: inhibit the scale foul accrued in the pipeline and heat exchanger, etc. equipment. 2.4) corrosion inhibitor: to inhibit pipeline, heat exchanger... etc. transport/drill well equipment corrosion occurred to rise up the economic profit. 2.5) defoamer: it will have some foam problem in the delay coke unit/hds unit/sru. defoamer is solved this problem. 2.6) desalting aid: crude was pump out from underground of land or ocean so it will have high content of the salt. the salts will corrosive the pipeline, heat exchanger, and so on facilities so it should be take off. desalting aid will assist the crude oil to desalt. 2.7) demulsifier: refinery will produce the slop oil. the slop oil has lot water content so it requires the demulsifier to separate the oil and water. the oil could be refined and the effluent will be sent to waste water treatment system then drain for environmental protection. 3. waste water treatment: 3.1) emulsion breaker: we will found slop oil in factory. it will have lot water content so ne