he MW-AR*1 is a high powered, long range 2.4GHz wireless outdoor CPE offering quality wireless communication and delivering data rates up to **0Mbps.For ideal wireless coverage across large areas w...

Membre gratuit

Points de confiance : 0

    The MW-MT*8 is a high performance wireless router supports using 2.4GHz wireless frequency for industrial and commercial wireless applications. It is based on a performance MediaTek MTK MT***0A p...

Membre gratuit

Points de confiance : 0

    The MW-AR*2 is a industrial grade high power wireless **2.*1n router for commercial applications. Using IEEE **2.*1n 2T2R MIMO technology and 5dBi omni detachable external antennas offer wide wirel...

Membre gratuit

Points de confiance : 0

    The MW-M*0 3G version is a dual band and feature-rich vehicle wireless router for commercial applications that require speedy 3G mobile network, dual WiFi and stand-alone GPS tracking as a soluti...

Membre gratuit

Points de confiance : 0

    The MW-AR*0B is a high performance and environmental friendly wireless ceiling access point AP based on Qualcomm Atheros AR***1 SoC with *4MB DDR2 RAM and 8MB SPI Flash configuration. It is a WiF...

Membre gratuit

Points de confiance : 0

    The MW-MT*8C is a **0Mbps Wireless Wall Mount AP that providing easy initial wireless installation and setup for personal or business. It is a small, durable, and environmental friendly device serv...

Membre gratuit

Points de confiance : 0

    3G/4G LTE WIFI module, apply to 3G/4G MIFI Router, Car wifi device, Security device General Features TDD LTE:Band*8/ Band*9/ Band*0/Band*1 FDD LTE: Band1/Band3/Band5/Band8 UMTS:Ba...

Membre gratuit

Points de confiance : 0

    Complies with **2.3u *0/**0Base-Tx and **0Base-Fx standard Provide one SC fiber connector and one UTP connector Auto-detection of half/full duplex transfer mode for Tx po...
    PON features IEEE **2.3ah EPON *0Km for single fibber Access *4 terminals for single fibber PON PON transmit and inspect receiving optical power Performance Specification: Switching capacity ...
    PON features IEEE **2.3ah EPON *0Km for single fibber Access *4 terminals for single fibber PON PON transmit and inspect receiving optical power Performance Specification: Switching capacity...
    Special features: Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc. Integrated OAM remote configuration and maintenance function. Support...
    Introduction: HZW-E**1 ONU is an EPON broadband terminal device designed for fulfilling FTTH request of telecom operators, internet access of SOHO people and renovation request of EPON+EOC infrastr...
    Introduction: HZW-E**1 ONU is an EPON broadband terminal device designed for fulfilling FTTH request of telecom operators, internet access of SOHO people and renovation request of EPON+EOC infrastr...
    Introduction: HZW-E***-W ONU is an EPON broadband terminal device designed for fulfilling FTTH request of telecom operators, internet access of SOHO people and renovation request of EPON+EOC infras...
    Introduction: HZW-E***-W ONU is an EPON broadband terminal device designed for fulfilling FTTH request of telecom operators, internet access of SOHO people and renovation request of EPON+EOC infras...
    ceramic ferrule Feature 1.Good Concentricity and Dimensional accuracy. 2.High Strength and Endurability, Good Anti-aging Performance. 3.Low Insertion Loss and High Pull Out ...
    Item SubItem Description Chipset Qualcomm***5/Qualcomm***6 Support AT T and T-Mobile WWAN Specification Frequency Bands GSM, EDGE, WCDM...
    GL-E***0T is a small scale office end OLTdevice of FTTX telecommunication level independently researched and developedby GL Company it conforms to IEEE**2.*****5 standard it can provide userwith ac

Membre gratuit

Points de confiance : 0

    GL-E***8T OLT includes three models: GL-E***8T 8 PON ports, 8 GE uplink , All GL-E***8T OLT products support power source redundancy. GL-E***8T OLT can be widely applied on the networks of the carri

Membre gratuit

Points de confiance : 0

    WD-T**0MH-PoE at Pass through POE Function Brief introduction WD-T**0MH-PoE at makes use of existing power lines to transfer network signals just plug it into the power source socket wherever ...
    WD****0M-G G.hn Industrial grade PLC adapter Brief introduction The product transmits the network signals through the existing power line, not need to wire, where is a soc...
    WD***0M HomePlugAV2 Brief introduction WD***0M transmits the network signals through the existing power line, the transmission rate up to **0Mbps, it adopts HomePlug AV2 standard...
    1. Lower delay design end to end delay
    Brand Name :Cisco Item model number :VWIC**2MFT-T1/E1 Item Weight :5 pounds Item Dimensions L x W x H :7.*8 x 5.*1 x 1.*7...

Membre gratuit

Points de confiance : 0

    PRODUCT FEATURES Up to 1.*5Gb/s data links DFB laser transmitter and PIN photo-detector. Up to *0km reach distance ***0nm wavelength Hot-pluggable SFP footprint ...
< Préc.  1  2  3  4  5  6  7  8  9  10  Suiv. >
Contact Us
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services